Re: Fairmont 472 Eddy head 649hp index car ......9.77 @132mph 10/31/18 *added videos

5pointslow June 5th 2023, 9:02 am

supervel45 wrote:Well Did You make anymore Progress?

Just stuff on order

supervel45 June 5th 2023, 9:11 am

5pointslow wrote:ported viktor and a pile of parts before i brought it all to local engine shop

Did you get that Victor Worked/Ported Yet?

I don't Know if you saw this or not. It may be worthwhile?

https://www.429-460.com/t28498-new-cj-intake

https://www.facebook.com/commerce/listing/1601530843679426/?media_id=0&ref=share_attachment

PS: ^ Not Mine. Always Try and Vet all used parts Purchases and Use Payer Protection when Possible!

5pointslow June 9th 2023, 8:54 am

Got my new pan in that clears my new kaase pump
Also got my rossler reid cased powerglide in as well

Rotating assembly is in and just waiting on my lifters to show up

Mark Miller June 9th 2023, 11:16 pm

I asked you about your Alternator Bracket Setup in the Engine Tech Section don't know if you seen it or not?Anyway were you using an Electric Water Pump with that setup as the link you posted of the company that sells the Bracket Setup says for Electric Water Pumps?Thanks

supervel45 June 9th 2023, 11:48 pm

He mentioned a Mezeirre water pump on page 2, Mark. I "assume" he was electric from the get go.

5pointslow June 10th 2023, 5:25 am

Mark Miller wrote: I asked you about your Alternator Bracket Setup in the Engine Tech Section don't know if you seen it or not?Anyway were you using an Electric Water Pump with that setup as the link you posted of the company that sells the Bracket Setup says for Electric Water Pumps?Thanks

Yep electric pump

supervel45 June 10th 2023, 11:14 am

Well, What About the Victor? Does it have much Port Work?

IE Like Consider adding the Long Runners? Intake Second Link.

https://2img.net/h/i273.photobucket.com/albums/jj226/carmagguy/BlueOvalBrawlerpage1.jpg

https://2img.net/h/i273.photobucket.com/albums/jj226/carmagguy/BlueOvalBrawlerpage5.jpg

supervel45 June 10th 2023, 7:33 pm

Hey some just popped up by you with a complete top end, minus carburetor. 75cc Cool

https://www.airflowresearch.com/315cc-bbf-cylinder-head/

I sent you the info, I doubt they will last long. They have been out of stock quite awhile. Set up for Mech. Roller with PAC Springs, Also.

Mark Miller June 10th 2023, 10:52 pm

5pointslow wrote:
Mark Miller wrote: I asked you about your Alternator Bracket Setup in the Engine Tech Section don't know if you seen it or not?Anyway were you using an Electric Water Pump with that setup as the link you posted of the company that sells the Bracket Setup says for Electric Water Pumps?Thanks

Yep electric pump

Thanks that Bracket Set Up looks nice but i don't have an Electric Water Pump so i doubt it would work on my Water Pump bummer!!

Sponsored content