BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

piston rings.. oil ring low tension or standard tension

3 posters

Go down

piston rings.. oil ring low tension or standard tension Empty piston rings.. oil ring low tension or standard tension

Post  bigunitmudracing January 26th 2011, 6:12 pm

piston rings.. oil ring low tension or standard tension???
bigunitmudracing
bigunitmudracing

Posts : 159
Join date : 2010-12-12
Location : hurley, wi

Back to top Go down

piston rings.. oil ring low tension or standard tension Empty Re: piston rings.. oil ring low tension or standard tension

Post  c.evans January 26th 2011, 6:36 pm

It depends on a number of things,,,,,such as vacuum pump or no vacuum pump, and it depends on what grit stone your block is honed with. Crankcase e-vac system or not. If you are going to build a good engine where the rings are hooked up and you're able to keep the cylinder clean and dry, then most of the time you can go with the low tension rings on a good race engine.

Hope this helps,

Charlie

c.evans
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 2260
Join date : 2008-12-03

Back to top Go down

piston rings.. oil ring low tension or standard tension Empty Re: piston rings.. oil ring low tension or standard tension

Post  Lem Evans January 26th 2011, 6:45 pm

Street engine = std. oil rings
Race = low oil rings
This is in the context of I think you have the 1/6-1/16-3/16 ring package.

Lem Evans

Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky

http://bfevansraceparts.com

Back to top Go down

piston rings.. oil ring low tension or standard tension Empty Re: piston rings.. oil ring low tension or standard tension

Post  bigunitmudracing January 26th 2011, 9:19 pm

will the ring chang the amount of vacuum the engine pulls???
its a race engine but it has to pull 15 in vacuum at 900 rpm...
thanks
Very Happy
bigunitmudracing
bigunitmudracing

Posts : 159
Join date : 2010-12-12
Location : hurley, wi

Back to top Go down

piston rings.. oil ring low tension or standard tension Empty Re: piston rings.. oil ring low tension or standard tension

Post  Lem Evans January 26th 2011, 9:33 pm

Ask your camshaft.

Lem Evans

Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky

http://bfevansraceparts.com

Back to top Go down

piston rings.. oil ring low tension or standard tension Empty Re: piston rings.. oil ring low tension or standard tension

Post  c.evans January 26th 2011, 10:55 pm

The "low tension ring" is referring to the tension of the oil ring expander, so it should not affect the amount of vacuum the engine pulls.

The engine's vacuum is greatly determined by the camshaft and specifically the amount of overlap. Thus widening the lobe seperation angle helps reduce the amount of overlap, and will increase the vacuum.

Hope this helps,

Charlie

c.evans
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 2260
Join date : 2008-12-03

Back to top Go down

piston rings.. oil ring low tension or standard tension Empty Re: piston rings.. oil ring low tension or standard tension

Post  Lem Evans January 26th 2011, 11:42 pm

bigunitmudracing wrote:will the ring chang the amount of vacuum the engine pulls???
its a race engine but it has to pull 15 in vacuum at 900 rpm...
thanks
Very Happy
It could a little......it's more about the top ring at that point........not the oil ring.
Ask the camshaft.

Lem Evans

Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky

http://bfevansraceparts.com

Back to top Go down

piston rings.. oil ring low tension or standard tension Empty Re: piston rings.. oil ring low tension or standard tension

Post  bigunitmudracing January 27th 2011, 2:39 am

YOU GUYS ARE AWSOME!!! cheers I dont know a lot about what makes changes in an engine. I dont have enough experience...
Thanks
bigunitmudracing
bigunitmudracing

Posts : 159
Join date : 2010-12-12
Location : hurley, wi

Back to top Go down

piston rings.. oil ring low tension or standard tension Empty Re: piston rings.. oil ring low tension or standard tension

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum