new ti retainer
2 posters
Page 1 of 1
new ti retainer
slurm January 22nd 2015, 10:54 am
Looking to swap titanium crower 86067 retainers on to my blue thunder heads. The springs have a damper. Will this cause chafing to the retainer?
slurm- Posts : 102
Join date : 2011-09-16
Age : 43
Location : north dakota
Re: new ti retainer
Wheelie58 January 22nd 2015, 10:29 pm
Slurm
You will need to look at the ID of your damper and compare it to the specs of the retainer.
If you have the spring part number and call the retainer manufacturer, they should be able to advise.
I have run dampened springs with TI with no issues if they fit correctly.
Keith
You will need to look at the ID of your damper and compare it to the specs of the retainer.
If you have the spring part number and call the retainer manufacturer, they should be able to advise.
I have run dampened springs with TI with no issues if they fit correctly.
Keith
Wheelie58- Posts : 1842
Join date : 2009-08-08
Location : Alpharetta, GA -
slurm- Posts : 102
Join date : 2011-09-16
Age : 43
Location : north dakota
Similar topics» oil adapter retainer
» Cam bearing question
» Measuring Cam lift at the retainer
» Valve Spring Retainer Question.
» I need 2 FRPP "blue" rockers that have the retainer clips.
» Cam bearing question
» Measuring Cam lift at the retainer
» Valve Spring Retainer Question.
» I need 2 FRPP "blue" rockers that have the retainer clips.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|