Tunnel ram vs single carb.......pros and cons ......any help would be appreciated

doin a 502-545 ci motor havnt decided if i want the 4.3 or the 4.5 crank using a d1ve block with the center cap 4bolts mains
and hardblock till the bottom of the water pumps .....solid roller , prob kaase p51 heads ..... 13.1 - 13.5.1 compression

going into a 88lx mustnag with a glide hooppin 9s ,just gonna use at track use only

but stuck on the tunnel ram vs big single carb ??? any help would be appreciated , im coming from the efi small block ford scene supercherged stuff so this is all together a diffrent animal ...thanks guys

i know this thread was for a different head but here is some insight

https://www.429-460.com/engine-tech-f2/comparing-sheetmetal-tunnel-ram-to-cast-single-four-t610.htm?highlight=tunnel+ram

Single carb will get you well in the 9's and be cheaper.

thanks guys ,, a nice ported vicktor then assuming with a dommy
hopefully my d1ve block with 4 bolt main centers and hardblock will handle the abuse

doin a 502-545 ci motor havnt decided if i want the 4.3 or the 4.5 crank using a d1ve block with the center cap 4bolts mains
and hardblock till the bottom of the water pumps .....solid roller , prob kaase p51 heads ..... 13.1 - 13.5.1 compression

going into a 88lx mustnag with a glide hooppin 9s ,just gonna use at track use only

but stuck on the tunnel ram vs big single carb ??? any help would be appreciated , im coming from the efi small block ford scene supercherged stuff so this is all together a diffrent animal ...thanks guys
---------------------------------------
the diff is 2x4s will make more power on any 502 to 545 or bigger engine ,but i would not stop at 13.5 to one,why? its going to have to have good gas anyway,so why not gain power since your spending $$$ money anyway?