460 in lincoln continental Mark iv rocker type
2 posters
Page 1 of 1
460 in lincoln continental Mark iv rocker type
Ghettoedeffender November 13th 2016, 11:32 pm
Hello everyone, i need to do a valve adjustment on my 460, it is stock to a 1973 lincoln continental mark iv.
Are the rockers the type where you torque them to 18-25 ft/lbs or are they the adjustable type? Thanks!
Are the rockers the type where you torque them to 18-25 ft/lbs or are they the adjustable type? Thanks!
Ghettoedeffender- Posts : 1
Join date : 2016-11-13
Re: 460 in lincoln continental Mark iv rocker type
rmcomprandy November 13th 2016, 11:54 pm
Ghettoedeffender wrote:Hello everyone, i need to do a valve adjustment on my 460, it is stock to a 1973 lincoln continental mark iv.
Are the rockers the type where you torque them to 18-25 ft/lbs ? Thanks!
In 1973 ... YES.
The valve train is NOT readily adjustable.
rmcomprandy- Posts : 6110
Join date : 2008-12-02
Location : Roseville, Michigan -
Similar topics» WANTED, CONTINENTAL MARK VIII BUCKET SEATS
» Looking for a set of rail-type rocker arm assemblies.. '70 429/460 engine
» Acceptable roller rocker contact at valve tip and pushrod to rocker contact?
» Big lobe & lower ratio rocker or smaller lobe & high ratio rocker? whcih will live and which makes more power?
» Mercon VS Type F....my 95 F-150 manual says to use Mercon...would type F hurt my 4R70W trans?
» Looking for a set of rail-type rocker arm assemblies.. '70 429/460 engine
» Acceptable roller rocker contact at valve tip and pushrod to rocker contact?
» Big lobe & lower ratio rocker or smaller lobe & high ratio rocker? whcih will live and which makes more power?
» Mercon VS Type F....my 95 F-150 manual says to use Mercon...would type F hurt my 4R70W trans?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum