c460 cam.
4 posters
Page 1 of 1
c460 cam.
new2460 January 11th 2016, 10:22 am
what springs would i need with the c460 hydraulic flat tappet cam? thanks jim
new2460- Posts : 195
Join date : 2009-11-18
Re: c460 cam.
dfree383 January 11th 2016, 10:51 am
The Doscontinued Ford Racing Springs A351 is what was used on the crate motors.
But you could use a Comp 924-16 or 930-16
But you could use a Comp 924-16 or 930-16
dfree383- BBF CONTRIBUTOR
- Posts : 14792
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: c460 cam.
rmcomprandy January 11th 2016, 11:00 am
Whatever springs will get you 125 pounds on the seat and about 320 pounds at .500" lift.
That Ford Racing spring is available from a lot of vendors using their part number and is the same as a #99893 Crane.
That Ford Racing spring is available from a lot of vendors using their part number and is the same as a #99893 Crane.
rmcomprandy- Posts : 6108
Join date : 2008-12-02
Location : Roseville, Michigan -
new2460- Posts : 195
Join date : 2009-11-18
jbozzelle- Posts : 3705
Join date : 2009-08-10
Age : 49
Location : New Orleans
Similar topics» New C460 Intake Manifold M-9424-C460
» Timing For C460 604 CID
» C460 heads
» New Ford Motorsport Intake for C460 cylinder heads
» C460 castings New
» Timing For C460 604 CID
» C460 heads
» New Ford Motorsport Intake for C460 cylinder heads
» C460 castings New
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|