Cam gear material type...Iron or steel?
+2
bbf-falcon
8liter
6 posters
Page 1 of 1
Cam gear material type...Iron or steel?
8liter November 1st 2013, 1:53 pm
What dictates the choice? Is it the thrust surface metals or the cam type? I see where they offer steel and iron cam and crank gears. I've got a steel crank and a solid roller cam, but I'm using the factory retainer plate. Was looking at a Cloyes.
Thanks, Casey
Thanks, Casey
Last edited by 8liter on November 1st 2013, 8:54 pm; edited 1 time in total
8liter- Posts : 202
Join date : 2009-01-06
Age : 54
Location : Murray KY
Re: Cam gear material type...Iron or steel?
bbf-falcon November 1st 2013, 2:55 pm
W/roller, go w/billet steel and double roller set. Call Lem,he's the cheapest.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: Cam gear material type...Iron or steel?
rmcomprandy November 1st 2013, 5:41 pm
A steel cam gear is stronger than a ductile iron gear. The thrust plate used has to be a match to the gear.8liter wrote:What dictates the choice? Is it the thrust surface metals or the cam type? I see where they offer steel and iron cam and crank gears. I've got a steel crank and a solid roller cam, but I'm using the factory retainer plate. Was looking at a Clouds.
Thanks, Casey
rmcomprandy- Posts : 6108
Join date : 2008-12-02
Location : Roseville, Michigan -
Re: Cam gear material type...Iron or steel?
8liter November 1st 2013, 8:58 pm
[/quote]A steel cam gear is stronger than a ductile iron gear. The thrust plate used has to be a match to the gear.[/quote]
That's what I was thinking. Who makes a steel retaining plate? What about thrust bearings? I see they make them for the cam side as well as the gear side of the retainer.
That's what I was thinking. Who makes a steel retaining plate? What about thrust bearings? I see they make them for the cam side as well as the gear side of the retainer.
8liter- Posts : 202
Join date : 2009-01-06
Age : 54
Location : Murray KY
Re: Cam gear material type...Iron or steel?
Lem Evans November 1st 2013, 9:08 pm
What you need , i.m.o. , is a timing set with a steel top gear & a bronze retainer plate.
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
Re: Cam gear material type...Iron or steel?
Lem Evans November 1st 2013, 11:49 pm
Lem Evans wrote:What you need , i.m.o. , is a timing set with a steel top gear & a bronze retainer plate.
Redouble post .
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
Re: Cam gear material type...Iron or steel?
Lem Evans November 1st 2013, 11:49 pm
Sounds legit.Lem Evans wrote:Lem Evans wrote:What you need , i.m.o. , is a timing set with a steel top gear & a bronze retainer plate.
Redouble post .
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
Re: Cam gear material type...Iron or steel?
Lem Evans November 1st 2013, 11:50 pm
UpdateLem Evans wrote:Sounds legit.Lem Evans wrote:Lem Evans wrote:What you need , i.m.o. , is a timing set with a steel top gear & a bronze retainer plate.
Redouble post .
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
Re: Cam gear material type...Iron or steel?
Lem Evans November 1st 2013, 11:54 pm
AmenLem Evans wrote:UpdateLem Evans wrote:Sounds legit.Lem Evans wrote:Lem Evans wrote:What you need , i.m.o. , is a timing set with a steel top gear & a bronze retainer plate.
Redouble post .
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
Re: Cam gear material type...Iron or steel?
Lem Evans November 1st 2013, 11:58 pm
start it and do a burnout.......Lem Evans wrote:AmenLem Evans wrote:UpdateLem Evans wrote:Sounds legit.Lem Evans wrote:Lem Evans wrote:What you need , i.m.o. , is a timing set with a steel top gear & a bronze retainer plate.
Redouble post .
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
Re: Cam gear material type...Iron or steel?
maverick November 2nd 2013, 5:50 am
Kitten killing bastard.
maverick- BBF CONTRIBUTOR
- Posts : 3059
Join date : 2009-08-06
Age : 72
richter69- Posts : 13649
Join date : 2008-12-02
Age : 53
Location : In the winners circle
Re: Cam gear material type...Iron or steel?
8liter November 2nd 2013, 2:56 pm
Ok. Thanks guys..now, please burn frayed end of the thread.....
8liter- Posts : 202
Join date : 2009-01-06
Age : 54
Location : Murray KY
Re: Cam gear material type...Iron or steel?
bbf-falcon November 2nd 2013, 6:26 pm
Nice pic's lem,good info.Lem Evans wrote:What you need , i.m.o. , is a timing set with a steel top gear & a bronze retainer plate.
Oh yea,I like puppy's8)
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: Cam gear material type...Iron or steel?
bbf-falcon November 2nd 2013, 6:27 pm
bbf-falcon wrote:Nice pic's lem,good info.Lem Evans wrote:What you need , i.m.o. , is a timing set with a steel top gear & a bronze retainer plate.
Oh yea,I like puppy's8)
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: Cam gear material type...Iron or steel?
Lem Evans November 2nd 2013, 6:38 pm
Bastard killing kittens.maverick wrote:Kitten killing bastard.
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
Similar topics» Steel Dizzy Gear & IDT Block?
» WANTED: steel distributor gear for 460
» Distributor gear for steel roller cam
» Mercon VS Type F....my 95 F-150 manual says to use Mercon...would type F hurt my 4R70W trans?
» Factory production Chrysler iron hemi head vs iron cobra jet
» WANTED: steel distributor gear for 460
» Distributor gear for steel roller cam
» Mercon VS Type F....my 95 F-150 manual says to use Mercon...would type F hurt my 4R70W trans?
» Factory production Chrysler iron hemi head vs iron cobra jet
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|