My track video's

Enjoy, comment, critique, no haters



I need to get some real good back view shots

Dave and I going at it




Oh well.....maybe next time

GOOD LORD .......i will be the first to hate ...get that 60' fixed and you got a mid 9 sec deal

bruno wrote:GOOD LORD .......i will be the first to hate ...get that 60' fixed and you got a mid 9 sec deal

Well thats no hating I hear ya but not sure where to go from here....just have to keep

bigblockfox468 wrote:

bruno wrote:GOOD LORD .......i will be the first to hate ...get that 60' fixed and you got a mid 9 sec deal

Well thats no hating I hear ya but not sure where to go from here....just have to keep

CONVERTOR ? LAUNCH RPM ? T/B?

Good run. Nice looking Mustang.

Yep Nick is correct, your 60 sux.............. I looks like you were pulling on the yellow car, what did it run, your faster than him if you get the 60's fixed.

bruno wrote:

CONVERTOR ? LAUNCH RPM ? T/B?

9.5'' PTC 5200 stall Blake got it built for me as per the dyno #'s . I did flash it and I got 5200 out of it. Looking at my notes the first video was a 5200 TB launch 1.47 60' 10 psi, the second video was an off idle pedal to the metal launch 1.44 60' 10 psi and the last was another 5200 TB launch 1.49 60' 12 psi.

What was your rear gear , I forgot? and what is it crossing the line at?

IDT-572 wrote:Yep Nick is correct, your 60 sux.............. I looks like you were pulling on the yellow car, what did it run, your faster than him if you get the 60's fixed.

That's Dave De. I know before his trans took a dump we ran them and he ran a 9.88 @ 135. Thats the one run where I aborted. He commented several times that his car was slowing and usually runs 140 and his et was down.

IDT-572 wrote:What was your rear gear , I forgot? and what is it crossing the line at?

373 about 6100

28/10.5 tire?

IDT-572 wrote:28/10.5 tire?

Yep........ Mickey Thompson ET Drags

I see a gear change in your future................. now we need some opinions on what gear to put in it.

I'm thinking it needs about a 4.30 4.10 min.

IDT-572 wrote:I see a gear change in your future................. now we need some opinions on what gear to put in it.

I'm thinking it needs about a 4.30 4.10 min.

or leave the same gear and put her on the hose ....... a big hose

bruno wrote:

IDT-572 wrote:I see a gear change in your future................. now we need some opinions on what gear to put in it.

I'm thinking it needs about a 4.30 4.10 min.

or leave the same gear and put her on the hose ....... a big hose

IDT-572 wrote:I see a gear change in your future................. now we need some opinions on what gear to put in it.

I'm thinking it needs about a 4.30 4.10 min.

I do have a 4.10 that I picked it up awhile back.....kinda figured it would be needed

NITROUS, NITROUS, NITROUS

juicey juice

all kidding aside , you have made some great progress ....keep it up and be safe

4.30's........that small tire needs wheel speed. 3.73's are a bit low and since your gonna keep it NA, 4.30's should be fine

I'm with Tony...4.30's should be a good gear for you.It's lookin good Mike!!

nice progress, looking good. Its been a LONG time since I been at that track. Is it still rough or did they work on it?

I seen Dave De car run 2 weeks ago a couple passes and he was 9.60s @ 140 mph. and his last pass yesterday was 125mph something wrong. Mike your car ran very good no problems just get in and drive that a real plus when they run without something going wrong you'll get the 60's going its a work in progress.

Very nice ! (both cars) 4:30's vs 3:73's will be like night and day....to the good side.