Water pump fitting
4 posters
Page 1 of 1
Water pump fitting
OldRedFord April 14th 2010, 2:03 am
Where can I get the water pump fitting that screws in the side of the water pump on my 460? What size is it?
OldRedFord- Posts : 465
Join date : 2009-08-08
Age : 38
Location : Conyers GA
Re: Water pump fitting
bbf-falcon April 14th 2010, 8:28 am
Run a pipe tap in it and put a (barb)fitting in it. 
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: Water pump fitting
chuck stevens April 14th 2010, 12:48 pm
3/8 NPT tap will fix it right up and, a brass nipple from your local hardware store will last forever.
chuck stevens- Posts : 299
Join date : 2009-08-06
Location : Beutiful uptown SOMIS, CA ELIMINATOR Dlr. -
Re: Water pump fitting
342g April 14th 2010, 12:55 pm
OldRedFord wrote:Where can I get the water pump fitting that screws in the side of the water pump on my 460? What size is it?
You talking about a radiator hose,? if so I have one you can have.
342g- BBF CONTRIBUTOR
- Posts : 3237
Join date : 2009-08-06
Age : 81
Location : Lawrenceburg, In.
Re: Water pump fitting
OldRedFord April 14th 2010, 11:10 pm
Nope. The hole in the water pump where the heater hose goes. Ended up checking Lowes first. Got a 1/2 MIP x 5/8 barb fitting. Threaded right in.
OldRedFord- Posts : 465
Join date : 2009-08-08
Age : 38
Location : Conyers GA
Similar topics» looking for water pump pic's
» 460 Water Pump Crossover Tube that goes in the Intake to the Water Pump?
» Trick flow intake water hose fitting
» custom water neck fitting for the NEW a460 manifold
» ANYONE RUNNING THE PROCOMP 35GPH ELECTRIC WATER PUMP--sorry, not proform pump
» 460 Water Pump Crossover Tube that goes in the Intake to the Water Pump?
» Trick flow intake water hose fitting
» custom water neck fitting for the NEW a460 manifold
» ANYONE RUNNING THE PROCOMP 35GPH ELECTRIC WATER PUMP--sorry, not proform pump
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|