custom water neck fitting for the NEW a460 manifold

anybody doing anything for the new style A460 intake on the water neck with a #10 or #12 AN fitting


Ace

CSR makes a 12 an swivel version http://www.race-mart.com/CSR-CSR-9110AN12B.html

Or use one of these with a 16an-12an reducer.

Moroso makes one in 16an. part number 63445
csr makes one in 16an part number 9110AN16C
canton in 16an part number 80-036
cvr in 16an part number TSH7ACL
steeda part number 070-01280

Earl's female 16an to male 12 an EAR-9892162ERL

Earl's female 16an to male 10an part number EAR-9892160ERL

I use a nice piece from here:
http://www.cobraearl.com/products/
It's lets you use any of dozens of brand X water necks.  AN hose, regular rad hose etc.  You also get the benefit of many of the chevy units having a built in expansion tank to help get air out of the system.  

I use mine with a combo water neck/expansion tank from CSR.  
3" tall (-12 hose) on the door car and the same part in a 6" length (-10 hose) for my last dragster.  They are available 3-4 different AN sizes and several rubber hose diameters.

powerstrokeace wrote:anybody doing anything for the new style A460 intake on the water neck with a #10 or #12 AN  fitting

Ace

Ace, If none of the commercially available ones make you smile, give me a call, or PM.
I have blank T-stat plates already cut and can make just about anything that you want for that application...AN fitting, neck with cap and fitting...or you just draw a picture and send it.
Keith
678-458-2033

Boy David i really like the ones you have. how build the upper necks and i see there's 2 different lengths. that would save me a ton of money. i was looking at the mezire water pump with the expansion tank and cap but this could be the ticket. I'm looking to get the new style manifolds over the winter and adapt these

Ace

Very nice!