testing the waters

Well last year they killed my class and now i'm hearing that they might move the races 450 miles from me. So if I decide to sell my stuff, what is it really worth??

548ci
sheetmetal intake with 2 1150 prosystems carbs
Charlies C heads with Ty valves with coated isky springs
WW rockers
Manton 7/16" tapered pushrods
Isky .904 red zone e-z roller lifters
60mm comp cam
Eliminator premier block 4.600 bore with bushed lifter bores
Kaase pump
billet crank 4.125 stroke
BME rods
JE lightened pistons 16-1
Danny Bee belt drive
sheetmetal valve covers
MSD dizzy

Made 1152hp and 820 torque on a very conservative dyno.
Been told it's 1200hp+ on everyone elses dyno. Based on the ET and MPH i'm guessing their right. Car ran 8.38 @ 165 in 4200 ft of air at 3200lbs on a TT5 slick with a glide.


1991 mustang gt hatch just built this year with all new parts.
25.3 moly cage
All UPR front and rear suspension
Wild rides upper and lower S-boxes
Adjustable rear coil spring perches that use the small spring
Strange brakes front and rear
9" narrowed 2" each side with 40 spline gun drilled axles
Mini tubbed
Full interior with carpet and 2 kirkey seats and center console
All autometer phantom guages
lightweight steering column with quick release wheel
halon system
8" cowl hood
HID headlights
ARC switch panel
Quik data
Product Engineering pump
16V battery
MSD 7530 box
Strang double adjustable rear shock and singles up front
Chandler racing front limiters
power windows
Markiwich front spoiler
billet specialties 15x10 and 15x4
hoosier 26x8.5 rears and mickey 26 front runners
Car weighs 2750 without me or ballast with that tank of an engine.
Car probably needs paint or a good buffing.

25,500 - 29,500

Maybe I should part it out!

mikep wrote:Maybe I should part it out!

you would definetly get more if you sell it as a roller then t/k ....... go to RJ and look thru some of the listings .....

So what is the roller worth and the engine worth after I freshen it??

IMHO, with all of the great parts you have in the engine and chassis, I would say the whole car is somewhere in the $35,000-$40,000 range. Rolling chassis alone is worth $18,000-$25,000.

sorry Mike ... i read your list again and the value would go up significantly due to the 25.3 chassis and some other aspects of the car ....... i would think you could get any were from 30,000 to 35000 for the car t/k , ive seen several c-headed motors , single carb deals sell for 12,000 - 15,000 complete carb to pan ....its a tuff market for these cars , but good luck with the sale ......

Hope you don't have to sell out Mike. You have a lot of nice parts in that list.

I was guessing around $15K for each of them! What would be the perfect deal would be to trade it for a nice street car!

Hate to say Mike, but it's only going to be worth what someone is willing to pay you for it! Part it out then you will come real close to getting back what you have in it. Some of those race mustang on racing junk have been sitting there for a few years now...

You have stuff on your car that I would be willing to pay you for. That's my 2 cents in a nut shell

that sounds boring Randy .......

Boring is sitting at the house...not racing.

richter69 wrote:Boring is sitting at the house...not racing.

bingo!

Why can't he race the door car?

richter69 wrote:Boring is sitting at the house...not racing.

True.


sucks you'd have to prt it out Mike. Is there an NHRA track nearby? You could always run Super gas or Super Street. Or go the pipe rack route...