79 Ford 4x4 Truck Headers

Looking for a set, new/used, for 79 f-250 4x4 4-speed, 2-1/8 tubes Coated, for fender well exit. Cobra Jet Heads.
Or if they have to be custom, A possible link.
Thanks Ed...........

Maddog makes a 2 inch primary header aswell as hedman(they look identical) for 2 and 1/8 or larger you can order a weldup kit from stahl and then send them off to be coated once fabricated with these kits you will have to modify your steering rod from column to box most likely. The other option is a cutom built set which the Fab Shop could help you with if you take them your truck.

Have you tried L&L ? 972-475-5202. Also, LMC Truck? 1-800-562-8782. Good luck!

514Comet wrote:Have you tried L&L ? 972-475-5202. Also, LMC Truck? 1-800-562-8782. Good luck!

L&L only mkes 1 7/8" for the early trucks. LMC is just standard small tube stuff too.

I would get with Tim at the Fab Shop and get a box of stuff from him. Another good idea would be to get Uncle Charlie's BBF to BBC adapter flanges. It will make it a lot easier to get the larger tubes into the flanges and be able to get at the bolts. I'm working on a set of upright headers with 2 1/8" pipe now and the Ford exhaust pattern would be tough deal.