new old guy to site
3 posters
Page 1 of 1
new old guy to site
southcross June 1st 2016, 7:18 pm
I am building a 65 Comet straight axle Gasser to run with the Southeast Gassers . I am trying to decide whether to run a big small block or a small big block.
southcross- Posts : 37
Join date : 2016-06-01
BBFTorino- Posts : 985
Join date : 2015-12-31
new old guy to site
southcross June 2nd 2016, 7:33 am
Think about lbs per cubic inch. 521 in, times 8.0 equals a 4168 lbs. Sounds like a parts breaker to me. 435 cubes is only 3480.
Going be hard to get a 65 Comet to weigh over 3500 lbs after it is gutted and straight axle. The motor can be set back 10% of the wheelbase.
Going be hard to get a 65 Comet to weigh over 3500 lbs after it is gutted and straight axle. The motor can be set back 10% of the wheelbase.
southcross- Posts : 37
Join date : 2016-06-01
Re: new old guy to site
bruno June 2nd 2016, 10:41 am
welcome to the site !!!!
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno- Moderator
- Posts : 10873
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL. -
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|