Finally ready to race

It's been two years since had the car to the track, going down to the race this coming Friday. Be the first outing with the p51 heads and roller cam. Old setup was D0VE-C heads and flat tappet cam with 11-1 compression. New engine is 14-1 compression, with 1150 dominator. Supposed to be 70*, no rain, 4300 ft. elevation.

Cant wait to hear your results!

Hope it all goes well Glen.

Thanks guys, hoping for low 10s, would be mid nines at near sea level. All steel, full body/interior '69 mustang fastback, N/A.

Good luck and have some fun

glenevans wrote:Thanks guys, hoping for low 10s, would be mid nines at near sea level. All steel, full body/interior '69 mustang fastback, N/A.

There was/is a guy in Houston that goes by the nickname HopaLong (Clutch Got his foot) that has a 69 Stang with Aluminum CJ Heads Ported to the Max and 500 something inch's on the spray. It was a Street Car and he would not give up a number, but it must have been pretty low as he had a hard time getting anybody to race him. I think it will go pretty good from the spec.'s you mentioned. Looking forward to the results.