BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

how much boost would it take....

5 posters

Go down

how much boost would it take.... Empty how much boost would it take....

Post  wayney March 19th 2015, 7:57 pm

ok, on a 521 p51 headed motor how much boost would it take to make approx. 1200 hp on gas? I don't know alot about turbos , been thinking about probably a big single in a year or so. i don't want to have to run a water to air intercooler. starting to kinda look at where i would be able to put an air to air that will support that hp level. is there any chance of getting there without an intercooler? i don't really want to run e-85.
thanks, wayne

wayney

Posts : 187
Join date : 2013-02-19
Age : 55

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  dfree383 March 19th 2015, 9:57 pm

I'd think with 12-15# it would be possible.
dfree383
dfree383
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 14802
Join date : 2009-07-09
Location : Home Wif Da Wife.....

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  whatbumper March 23rd 2015, 10:32 pm

It'd be easier and most likely cheaper with twins. I would use efi for tuning though.

whatbumper

Posts : 3024
Join date : 2009-11-11
Age : 43

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  wayney March 24th 2015, 7:38 pm

yea, i thought about smaller twins it would depend on packaging. is there a boost level that would require a water to air intercooler? would twins work running them into a Y then into a single inter cooler? i would definitely go EFI no question.

wayney

Posts : 187
Join date : 2013-02-19
Age : 55

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  sandvipr May 10th 2015, 6:04 pm

I'm running a single s475 on my 466 and it was previously dyno'd at 975 at the rubber at 4500 R's on E85. I would think that a pair of 75's and a good intercooler would get you to those numbers on 93 octane with a safe tune and 15 lbs of boost with that many cubes.
sandvipr
sandvipr

Posts : 29
Join date : 2013-01-06
Age : 49
Location : Holland, MI

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  Mark Miller May 11th 2015, 11:28 pm

sandvipr wrote:I'm running a single s475 on my 466 and it was previously dyno'd at 975 at the rubber at 4500 R's on E85.  I would think that a pair of 75's and a good intercooler would get you to those numbers on 93 octane with a safe tune and 15 lbs of boost with that many cubes.

Is that your Bronco in your avatar?

Mark Miller

Posts : 1896
Join date : 2009-09-01

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  sandvipr May 12th 2015, 8:28 am

It was. I sold it last summer. I just like the pic so I left it.
sandvipr
sandvipr

Posts : 29
Join date : 2013-01-06
Age : 49
Location : Holland, MI

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  Mark Miller May 13th 2015, 12:34 am

Don't you have the yellow BBF Turbo Fox Body Mustang in the Ford Build Section on Yellowbullet?

Mark Miller

Posts : 1896
Join date : 2009-09-01

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  sandvipr May 13th 2015, 7:09 am

I do..... Cool It's an '01.
sandvipr
sandvipr

Posts : 29
Join date : 2013-01-06
Age : 49
Location : Holland, MI

Back to top Go down

how much boost would it take.... Empty Re: how much boost would it take....

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum