SV1 on mafia intake
4 posters
Page 1 of 1
SV1 on mafia intake
FORDMUD June 9th 2014, 10:11 am
What does it take to make it work? I thought I remembered seeing it takes some grinding.
FORDMUD- Posts : 290
Join date : 2009-02-09
Location : Meridian MS
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: SV1 on mafia intake
514Fox87 June 9th 2014, 4:20 pm
I have a 4" SV-1 on mine and have no problems. Just make sure you put the tapered spacer on right. If not carb. gets stupid. I learned he hard way.
514Fox87- Posts : 436
Join date : 2009-08-08
Age : 58
Location : Harrington DE
FORDMUD- Posts : 290
Join date : 2009-02-09
Location : Meridian MS
Re: SV1 on mafia intake
514Fox87 June 9th 2014, 7:06 pm
It came with 1/2 inch spacer and that is all I run.
514Fox87- Posts : 436
Join date : 2009-08-08
Age : 58
Location : Harrington DE
Re: SV1 on mafia intake
bbf-falcon June 9th 2014, 11:11 pm
I have the tapered spacer and a 1" under it.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: SV1 on mafia intake
FORDMUD June 12th 2014, 5:08 pm
Would cutting the top out square change the distribution much? Seems Patrick is against any form of a cloverleaf with the sv1.
FORDMUD- Posts : 290
Join date : 2009-02-09
Location : Meridian MS
Re: SV1 on mafia intake
bbf-falcon June 13th 2014, 7:20 am
I agree w/Pat. A clover leaf would hurt imo. Open spacers aren't that expensive.
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: SV1 on mafia intake
Diddly June 13th 2014, 2:45 pm
I ground the cloverleaf out of mine and run with no spacer.
Diddly- Posts : 39
Join date : 2011-10-20
Re: SV1 on mafia intake
FORDMUD June 13th 2014, 2:59 pm
I don't mind running a spacer(s) or doing a little grinding. I'll probably do both. 
FORDMUD- Posts : 290
Join date : 2009-02-09
Location : Meridian MS
Similar topicsPage 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|