does exhaust help in this motor build??
3 posters
Page 1 of 1
does exhaust help in this motor build??
Dive stock lowerend, stock e7 heads, 514 / 524 lift cam , duration at 50 -218/226 ..stock intake,.
after the headers would it make more power if it had say 40 in of exhaust pipe on each side vs. open headers???
after the headers would it make more power if it had say 40 in of exhaust pipe on each side vs. open headers???
racinghabbit- Posts : 575
Join date : 2011-07-12
Re: does exhaust help in this motor build??
There is going to be an optimal length somewhere between the collector and the end of the pipe.
I would say testing will be needed.
I would say testing will be needed.
IDT-572- BBF CONTRIBUTOR
- Posts : 4628
Join date : 2008-12-02
Age : 63
Location : Shelbyville Tn.
Re: does exhaust help in this motor build??
Take to track, then take a spray of paint and pant them then make a blast down the track
and where the paint burns off is where you cut the pipe. it'll be a strip around the pipe where it burns.
Close enough for for county work.
and where the paint burns off is where you cut the pipe. it'll be a strip around the pipe where it burns.
Close enough for for county work.
res0rli9- BBF CONTRIBUTOR
- Posts : 3351
Join date : 2008-12-02
Age : 74
Location : sarasota FL.
Similar topics
» new A headed street motor build for a 67 fairlane
» Backup motor build under way...soon as the snow clears
» Ford 598 Pump Gas Street / Strip Motor
» motor build
» What are the most cost efficient parts needed to build a 1000 hp stroker motor for a 1/4 mile bracket car?
» Backup motor build under way...soon as the snow clears
» Ford 598 Pump Gas Street / Strip Motor
» motor build
» What are the most cost efficient parts needed to build a 1000 hp stroker motor for a 1/4 mile bracket car?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum