Nitrous and spacers

I am running a Victor with the clover leaf and wanting to run a NX plate system. Could I install a 2' spacer on the intake and install the plate system on top of that and not have to remove the clover leaf. Just not wanting to renove the intake for all that grinding.

cut the cloverleaf out.

Not what I wanted to hear but "Gotta do what you gotta do". Thanks richter69 ....

Just cut the front and rear out. Then round over the sides. That's what I did on my Victor, worked like a champ!

  Thanks kjett. does the plate go on top or bottom of the carb spacer?

I run mine under the spacer. So it's carb, spacer, plate, then intake

Thanks again!!!

I seen most plate system using the spacer on top of plate for ease of access to plate and jets... thats how I run and have try both ways without any improvement either way

Thanks quick 52 .. It does make access easy.