Kaase oil pump

Going dry sump.

Kaase pump up for sale, used a year in the boat.
$175 plus the ride.

Is this for a front or rear sump?

Front sump

bump

do you have the pick up tube?

butterbean wrote:do you have the pick up tube?

the Oil pan is a custon Charlie oil pan for a boat, the pick-up tube is custon to this pan.

That pump can also be used as a rear sump.Just change the block plate for the back to the Front bottom and install your rear sump pu tube. That what I did.

bbf-falcon wrote:That pump can also be used as a rear sump.Just change the block plate for the back to the Front bottom and install your rear sump pu tube. That what I did.

Not so fast Buckwheat, not so I have 3 different pumps and each have different outputs, one is rear sump, one is front sump and one universal so not every pump is interchangeable.....that would make it to easy if they were......

blown86hallet wrote:Going dry sump.

Kaase pump up for sale, used a year in the boat.
$175 plus the ride.

Do you know the part number on it if it is where it can be changed to rear sump.I have to buy a rear sump in the real near future as I am putting my short blovk together now.

PM Sent a few days ago. Bump in case your box is full.

[quote="the Coug"]

bbf-falcon wrote:That pump can also be used as a rear sump.Just change the block plate for the back to the Front bottom and install your rear sump pu tube. That what I did.

Not so fast Buckwheat, not so I have 3 different pumps and each have different outputs, one is rear sump, one is front sump and one universal so not every pump is interchangeable.....that would make it to easy if they were......[/quot

Didn't know there were 3 diff. pumps Randy. My Bad, and thx for correcting me.

Rick I thought like you did but I just got a new pump and it is diferent, there is a front only, a rear only and a both with the removeable plate....so if you want one when ordering it be specific for your application...

[quote="bbf-falcon"]

the Coug wrote:

bbf-falcon wrote:That pump can also be used as a rear sump.Just change the block plate for the back to the Front bottom and install your rear sump pu tube. That what I did.

Not so fast Buckwheat, not so I have 3 different pumps and each have different outputs, one is rear sump, one is front sump and one universal so not every pump is interchangeable.....that would make it to easy if they were......[/quot

Didn't know there were 3 diff. pumps Randy. My Bad, and thx for correcting me.

Dummie.......you need to pay more attention Now write that down somewhere so Professor Coug doesn't have to waste his time correcting your mistakes

TravisRice wrote:PM Sent a few days ago. Bump in case your box is full.

Bump to the top ..........

TravisRice wrote:

TravisRice wrote:PM Sent a few days ago. Bump in case your box is full.

Bump to the top ..........

Bumping again, PM's are in my outbox yet so they have not been opened. If you want to sell it get back to me.

is it still for sale, or is it gone????

i

TravisRice wrote:

TravisRice wrote:

TravisRice wrote:PM Sent a few days ago. Bump in case your box is full.

Bump to the top ..........

Bumping again, PM's are in my outbox yet so they have not been opened. If you want to sell it get back to me.

One last time, even tried paging you in the General Discussion Forum...........

Travis good luck I have also sent pm to him with no response I ordered a new pump today they told me at Jon's place said they hope in 2 months they will be back in production

69F100 wrote:Travis good luck I have also sent pm to him with no response I ordered a new pump today they told me at Jon's place said they hope in 2 months they will be back in production

i sill have it.... Just tired of all the low ball offers.
THis is not craigslist nor is this pump going anywhere for pennies on the dollar...

I'm removing the pump for the engine today, will post up pics.

TravisRice Tue 12 Feb - 16:28

I pmed last month and got no responce. I would be interested @ $165 shipped to 21530 MD.

Thanks Travis

--------------------------------------------------------------------------------------------------------

blown86hallet Wed 13 Feb - 6:46

165 shipped...

i'll go 165 if you pay for the ride.

---------------------------------------------------------------------------------------------------------

TravisRice Tue 15 Feb - 16:01

I'll do the $165 + shipping .Send me a total and how you want paid. Paypal, Money Order? and some contact info.

Travis Rice
14201 Streett Road NE
Flintstone, MD 21530

------------------------------------------------------------------------------------------------------------

TravisRice Sun 24 Feb - 10:09

Wanting to make the deal. Maybe your inbox is full ???

------------------------------------------------------------------------------------------------------------

Adam,
The last two PM's are still sitting in my outbox. I thought everything was good as you responded with a price + shipping ? If I am the one who pissed you off wish you would have said no deal.

Travis

Travis...

not sure why, but not getting pm's, maybe i box is full? I made funny,,,,, "BOX"..

anyway, sure I'll do the deal with ya'.

let me get my inbox empty.. I'll pm ya.

Pmed you back, but just in case consider it sold. How do you want paid ? Money order , paypal ?? Let me know.

Travis

blown86hallet wrote:

69F100 wrote:Travis good luck I have also sent pm to him with no response I ordered a new pump today they told me at Jon's place said they hope in 2 months they will be back in production

i sill have it.... Just tired of all the low ball offers.
THis is not craigslist nor is this pump going anywhere for pennies on the dollar...

I'm removing the pump for the engine today, will post up pics.

I sent you a pm but guess your box was full I see you have sold it to Travis