FOX/standard offset or centerd engine ?
2 posters
Page 1 of 1
FOX/standard offset or centerd engine ?
stanggt February 26th 2012, 12:22 am
is it a big difference wether u place the motor in stadard location or use the plates that center engine? I know I want to line the crank straight up to the pinion and all that. the plate I have now is standard. does it really matter?
stanggt- Posts : 494
Join date : 2011-07-13
Age : 52
Location : Midland,Michigan
stanggt- Posts : 494
Join date : 2011-07-13
Age : 52
Location : Midland,Michigan
Re: FOX/standard offset or centerd engine ?
zbob February 26th 2012, 11:19 pm
not a chassis guy at all, but i will mention that drivers side header clearance to the steering shaft was less than 1/4 and header clearance to the frame rail pass side was closer. this was with a d and d kmember, ford racing fox swap mounts on my zeph....something to think on....zbob
zbob- Posts : 269
Join date : 2009-08-17
Age : 69
Location : mn
Similar topics» Fox body engine offset
» IHRA Crate engine build...old 460/535 hp combo....opinions from engine builders on this setup
» 514ci BLUE THUNDER HEADED ENGINE & bbf parts,and engine for sale
» need info asap on engine combo ( 4.3 vs 4.5 crank) ordering it by tommmorrow details inside of engine plans
» 653 CI Thor Headed big block Ford engine / ENGINE SOLD THANKS!!!!!
» IHRA Crate engine build...old 460/535 hp combo....opinions from engine builders on this setup
» 514ci BLUE THUNDER HEADED ENGINE & bbf parts,and engine for sale
» need info asap on engine combo ( 4.3 vs 4.5 crank) ordering it by tommmorrow details inside of engine plans
» 653 CI Thor Headed big block Ford engine / ENGINE SOLD THANKS!!!!!
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|