Re: Mike Stevens Build

Oakley Motorsports November 27th 2011, 11:59 pm

We were going but our plans changed this afternoon to not going. Its a Ky thing i guess. We can never make our mind up. lol Sorry Mike we will have to hook up another time.

QtrWarrior November 28th 2011, 5:22 am

No problem Phillip. we'll do it in Owensboro in a few weeks.. Cool

Oakley Motorsports November 29th 2011, 7:23 pm

installed manley 7/16 push rods, crower rockers and JOMAR stud girdle.

Mike Stevens Build - Page 5 018

John Myrick November 29th 2011, 7:37 pm

puuuuurdy

QtrWarrior November 29th 2011, 7:53 pm

powerstrokeace November 29th 2011, 9:17 pm

Who makes the 7/16 guide plate for the A head?

Ace

Oakley Motorsports November 29th 2011, 9:46 pm

Trick Flow.

Doug Rahn November 30th 2011, 6:41 pm

Nice, it won't be long now!

Oakley Motorsports December 1st 2011, 11:33 pm

nitrous kit came in.

Mike Stevens Build - Page 5 007

installed nozzles

Mike Stevens Build - Page 5 008

you will notice nozzles off center a little. this is because of port alignment.

Doug Rahn December 3rd 2011, 6:38 pm

"Are we there yet, are we there yet"? bounce

QtrWarrior December 3rd 2011, 9:20 pm

Doug Rahn wrote:"Are we there yet, are we there yet"?

Easy Grandpa...easy !!!

Oakley Motorsports December 8th 2011, 8:09 pm

Thanks to Keith Fulp for working with us on the timing pointer and crank trigger eye mount you see in the lower picture

QtrWarrior December 8th 2011, 8:20 pm

Looking good Phillip !!! bounce

c.evans December 8th 2011, 8:30 pm

Mikey,

I told you earlier today that he had made a lot of progress on it. Looking good Phillip. Very Happy

Charlie

Larry Williams December 8th 2011, 9:03 pm

a very purdy motor

bruno December 8th 2011, 9:20 pm

are you guys gonna spray her on the dyno ?

Doug Rahn December 8th 2011, 9:55 pm

Mike Stevens Build - Page 5 Koolaid-good

Oakley Motorsports wrote:

Thanks to Keith Fulp for working with us on the timing pointer and crank trigger eye mount you see in the lower picture

Wheelie58 December 8th 2011, 11:56 pm

The trigger arm kit and the pointer look right at home on the nice new mill!
I bet that thing will fly.
Thanks!
Keith

CP598 December 9th 2011, 12:45 am

Looks fantastic. Can you share a little info on what looks to be a UHMW carb spacer? Also any info on the phenolic spacer?

Thanks.

Vern

dfree383 December 9th 2011, 4:24 am

powerstrokeace wrote:Who makes the 7/16 guide plate for the A head?

Ace

TFS makes some.

c.evans December 9th 2011, 11:00 am

CP598 wrote:Looks fantastic. Can you share a little info on what looks to be a UHMW carb spacer? Also any info on the phenolic spacer?

Thanks.

Vern

Vern,

The UHMW (white) spacer is one that I make here, and is simply a cloverleaf type spacer for the big bore carbs. The one that you called phenolic, is actually a red anodized alum. carb shear plate made by Quick Fuel Technology. Each is 1/2" thick.

Hope this helps,
Charlie

CP598 December 9th 2011, 9:17 pm

c.evans wrote:
CP598 wrote:Looks fantastic. Can you share a little info on what looks to be a UHMW carb spacer? Also any info on the phenolic spacer?

Thanks.

Vern

Vern,

The UHMW (white) spacer is one that I make here, and is simply a cloverleaf type spacer for the big bore carbs. The one that you called phenolic, is actually a red anodized alum. carb shear plate made by Quick Fuel Technology. Each is 1/2" thick.

Hope this helps,
Charlie

Thanks for the reply Charlie. I am thinking of adding a shear plate with my Powercone, any advice on this? Also I am wanting some more port work done on my heads, but have a dozen questions, I probably will be contacting you after the first of the year.

Thanks.

Vern

Doug Rahn December 10th 2011, 6:16 am

Dyno date yet Question

QtrWarrior December 10th 2011, 6:51 am

Doug Rahn wrote:Dyno date yet

Will know more next week GrandPa.. clown

Outlaw5.0 December 11th 2011, 6:41 pm

Looks really good Mike!.

Sponsored content