Big Block Ford Club Registry
+10
CDicus
Larry Williams
hank2531
70torinocobra
mpinder18
71 f 150
Cobra Tracks
342g
LuckyTX52
D. Sea
14 posters
Page 1 of 1
Big Block Ford Club Registry
Big Block Ford Club Registry
Hey guys,
I'm updating the Big Block Ford Club Registry. I will NOT blast your information over the Internet or sale it to anyone (Wouldn't know how to anyway). That being said, if you DON'T wish to be on the registry then please let me know. If you DO wish to be on this club registry then send me your information. Let me know if anything has changed since you last sent me information i.e. e-mail address, phone number, mailing address etc..
If you have changed your screen name then please send me an update. Most likely my PM box will be full so if you don't hear back from me within a reasonable amount of time then most likely I didn't get your message. You can also send this information via the e-mail button.
.
In the future I'll use this list to contact you about upcoming events related to our forum(s) and Big Block Ford gatherings etc...
Also need to know your vehicle information i.e Mine is 83 Mustang, 534ci glide, runs 5.90’s and 9.30’s N/A
Another example: 87 Ford F250 Pulling Truck 485ci Iron CJ Heads, just something general. No details please
I'm adding this to a vehicle section and I also have a comment section i.e some people have websites.
Thanks!
Hey guys,
I'm updating the Big Block Ford Club Registry. I will NOT blast your information over the Internet or sale it to anyone (Wouldn't know how to anyway). That being said, if you DON'T wish to be on the registry then please let me know. If you DO wish to be on this club registry then send me your information. Let me know if anything has changed since you last sent me information i.e. e-mail address, phone number, mailing address etc..
If you have changed your screen name then please send me an update. Most likely my PM box will be full so if you don't hear back from me within a reasonable amount of time then most likely I didn't get your message. You can also send this information via the e-mail button.
.
In the future I'll use this list to contact you about upcoming events related to our forum(s) and Big Block Ford gatherings etc...
Also need to know your vehicle information i.e Mine is 83 Mustang, 534ci glide, runs 5.90’s and 9.30’s N/A
Another example: 87 Ford F250 Pulling Truck 485ci Iron CJ Heads, just something general. No details please
I'm adding this to a vehicle section and I also have a comment section i.e some people have websites.
Thanks!
D. Sea- Posts : 2768
Join date : 2008-12-02
Age : 54
Location : Kentucky
Re: Big Block Ford Club Registry
LuckyTX52 wrote:you can use the info from the email I sent earlier.
Yes I got it, Thanks Keith
D. Sea- Posts : 2768
Join date : 2008-12-02
Age : 54
Location : Kentucky
Re: Big Block Ford Club Registry
Mine should be the same Damon
342g- BBF CONTRIBUTOR
- Posts : 3237
Join date : 2009-08-06
Age : 81
Location : Lawrenceburg, In.
Re: Big Block Ford Club Registry
Hey, I have a 65' Cobra SC, with a 514. she scoots.
Steve
Steve
Cobra Tracks- Posts : 7
Join date : 2009-10-02
Age : 78
Location : Cherry Log, GA
Re: Big Block Ford Club Registry
introducing myself
71 f 150- Posts : 3
Join date : 2010-01-07
Age : 38
Location : idaho
Re: Big Block Ford Club Registry
Guys,
If you want to be on the BBF Registry please send me your e-mail address, phone number, mailing address etc..
See first post above.
Thanks
If you want to be on the BBF Registry please send me your e-mail address, phone number, mailing address etc..
See first post above.
Thanks
D. Sea- Posts : 2768
Join date : 2008-12-02
Age : 54
Location : Kentucky
Big Block Ford Registry
83 Mustang Hatchback(89 front end) prostreet body 502 cu in, ported iron supercobra jet heads, 850 ddp Holley hp. I have been building big fords for about 15 years, love them. I am called mustangmike (nickname) mpinder18, might be changing username soon to mustangmike on 429-460. .
mpinder18- Posts : 38
Join date : 2011-09-18
Age : 61
Location : Maryland
not sure
I'm not sure if I'm on the registry or not. If not, I go by 70torinocobra. I have a 1970 Torino Cobra CJ 429, and trying to get a 545" stroker together. My e-mail is R_marcet@hotmail.com, address is Roger Marcet 1041 S Monte Tesoro Dr. Cottonwood, Az. Phone is 928/649-8166.
70torinocobra- Posts : 2
Join date : 2011-11-19
Age : 78
Location : Cottonwood Az.
1997 F-250
Mild build of a 1997 FI 460 bb, bored .030", higher comp pistons, D3VE heads, Edlebrock performer 460 intake, modified to use the original injectors and upper intake manifold. No A.I.R system, and a K&N intake. Engine runs well, I think it could be better.
hank2531- Posts : 8
Join date : 2013-04-15
Age : 43
Location : Maine
Re: Big Block Ford Club Registry
where is the list?
Larry Williams- Posts : 884
Join date : 2009-08-08
Age : 79
Location : Wallacetown Ontario
BBF Registry - new entry
My car - 89 Foxbody Drag Car, just purchased, has 4:10 gear 9" strange axels, JW PG, 598 BBF w/C460 Heads, 15:1 CP, 1050hp, 850 ft/lbs torque. username CDicus.
CDicus- Posts : 2
Join date : 2013-09-12
Re: Big Block Ford Club Registry
Damon I had a screen name but for got it so I registered again using the same screen name that I have over at the 460 ford forum and I want to be in the registry!!!!
Fordmanmatt I have a 78 Ford F150 Street/Strip Bracket Racing In the High 10s and Low 11s at Brainerd MN International Raceway.... 3.73 Gears, 1050 Quickfuel Carb ,150-200 Shot of Nitrous, 2800 Stall Convertor, Trick Flow Heads 521 Cubic Inches For 2014
Fordmanmatt I have a 78 Ford F150 Street/Strip Bracket Racing In the High 10s and Low 11s at Brainerd MN International Raceway.... 3.73 Gears, 1050 Quickfuel Carb ,150-200 Shot of Nitrous, 2800 Stall Convertor, Trick Flow Heads 521 Cubic Inches For 2014
D. Sea wrote:Big Block Ford Club Registry
Hey guys,
I'm updating the Big Block Ford Club Registry. I will NOT blast your information over the Internet or sale it to anyone (Wouldn't know how to anyway). That being said, if you DON'T wish to be on the registry then please let me know. If you DO wish to be on this club registry then send me your information. Let me know if anything has changed since you last sent me information i.e. e-mail address, phone number, mailing address etc..
If you have changed your screen name then please send me an update. Most likely my PM box will be full so if you don't hear back from me within a reasonable amount of time then most likely I didn't get your message. You can also send this information via the e-mail button.
.
In the future I'll use this list to contact you about upcoming events related to our forum(s) and Big Block Ford gatherings etc...
Also need to know your vehicle information i.e Mine is 83 Mustang, 534ci glide, runs 5.90’s and 9.30’s N/A
Another example: 87 Ford F250 Pulling Truck 485ci Iron CJ Heads, just something general. No details please
I'm adding this to a vehicle section and I also have a comment section i.e some people have websites.
Thanks!
fordmanmatt- Posts : 33
Join date : 2013-11-09
Age : 56
Location : Wilmingto NC 28410
new to site
been on this site for a while now .names keith.im building a top sportsman ford probe with a blown sbf !been running a inj bbf in a tube chassis mustang for the last few years !been building transmissions for 30 years ,been in business for 18 years. and i love drag racing a ford!
keith hunter- Posts : 4
Join date : 2014-05-25
Age : 59
Location : lousiana
Re: Big Block Ford Club Registry
Hi , I'm a newbie from Louisiana , I visit the site quite often , big block ford fanatic , . My ride is an 87 fox hatchback, 514 cu c 4 !, all motor, 10.5 , 6.20's 1/8 @ 3100 lbs , upgrading my combo now , wanting to go faster !
Similar topics
» New member - John G - (71 Torino GT)
» New 57 Ford Project Should we go big block or small block? Pics added
» big block ford parts,and sb ford
» Ford 430 Big Block
» First Ford, first big block...
» New 57 Ford Project Should we go big block or small block? Pics added
» big block ford parts,and sb ford
» Ford 430 Big Block
» First Ford, first big block...
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|