My Bullitt Beast

Time is here and my car ready to get going. I am just waithing on my tranny and carbs. Thanks to all who helped with kicking my butt to do this thing right, I am glad I did. I think this is going to be a great setup.

[engine]
521 full forged stroker d1ve shortblock.
SCJ heads cleaned and modded by me.
13.3:1 compression.
D&D 2 1/8 longtube headders.
Weiand tunnel ram.
[2] Holley 750 carbs.

[transmission]
Fully built C-6
Reverse valve body with trans brake.
PTC custom 10 converter [4200 stall].

A little later I will put my little shot of N2O on it but I don't think to much that run the streets will be a threat.
This should be a awsome import killer.

What would be a good way for me to post pics? I got a bunch to show ya.

photobucket............

Sounds like a killer build....should be stout...good luck with it.
To post pics...follow this link and follow the instructions....Courtesy of 'ol Skosler.... http://www.460ford.com/forum/showthread.php?t=116025

Treeyasoon wrote:Sounds like a killer build....should be stout...good luck with it.
To post pics...follow this link and follow the instructions....Courtesy of 'ol Skosler....

the invisable link..................

Yea, just click on the "Dumbass" icon over there to the right...lol. Linky Fixed..

Treeyasoon wrote:Yea, just click on the "Dumbass" icon over there to the right...lol. Linky Fixed..

Les has an icon?????

Here is a little teaser

This was a mock up pic. I will post the most up dated pics tomorrow as soon as I get more loaded, Thanks Treeyasoon for the info.

richter69 wrote:

Les has an icon?????

Nice one

Nice photo

Are you gonna have the engine dyno'd or the car chassis dyno'd

Good luck with your project and I agree it will eat most imports and those smart-aleks with their new Camaros.

I am planning to engine dyno it. I have most of the stuff hooked minus the carbs, it's going to be nice tomorrow so I can get great pics for you all to see.

This thread sucks without pics! I am a BULLITT lover and want to see this so bad! My dad has an 03 Mach 1 in absolute perfect condition I keep telling him it is perfect for a BBF, Powerglide, 9", and would make an awesome 10.5 car but he just tells me to keep dreamin

A few more......

https://2img.net/h/i970.photobucket.com/albums/ae189/TennesseeBullitt/car/P1000312.jpg
https://2img.net/h/i970.photobucket.com/albums/ae189/TennesseeBullitt/car/P10003432.jpg
https://2img.net/h/i970.photobucket.com/albums/ae189/TennesseeBullitt/car/P1000323.jpg

https://2img.net/h/i970.photobucket.com/albums/ae189/TennesseeBullitt/car/P1000314.jpg

Bullet, you got a nice ride there, but those air breathers will catch fire, I have seen it happen two or three times, they leave a big mess inside the carbs. (just trying to help)

342g wrote:Bullet, you got a nice ride there, but those air breathers will catch fire, I have seen it happen two or three times, they leave a big mess inside the carbs. (just trying to help)

yep, those need to go..................

Oh yea they are going. I just got those to use until I have the money to get this...

http://www.summitracing.com/parts/SUM-G3106-1/?rtype=10

I had measured and trimed for the hood to lift off hood around the scoop. Here is a pic of my hood......

https://2img.net/h/i970.photobucket.com/albums/ae189/TennesseeBullitt/P1000319.jpg

Yea I know I have a huge hole in it, I rather see motor instead .

dude, dont put that fake injector deal on there lol.

Get an old school Hilborn deal, or have an alum one fabbed up...............old mailbox....anything but the fake 3 hole injector hat.

I like the hilborn style too, what is so bad about the scoop deal? Are they just a deal like the main gridles, just a waste of money? I will admit they do look like a PITA to setup.

Those things are just hokey, you see the highschool kids running around with stuff like that.

What are you doing with the hydroboost? You gonna run it?

richter69 wrote:Those things are just hokey, you see the highschool kids running around with stuff like that.

Ditto... back when I was the kid just outta high school a guy I worked with gave me his at the point he realized this..

...But I never used it

Yea I am going to run the hydroboost, I have aerospace drag brakes up front and in the back, It all works good.
Don't kill me but the valve covers are pro comps... Those were the only plain aluminum ones I could find to paint. They are 4 1/2 in tall and they clear the hydrobooster.

Tennessee Bullitt wrote:Don't kill me but the valve covers are pro comps... Those were the only plain aluminum ones I could find to paint.

as long as its just valve covers i think it can be overlooked

Well I have been working on and alternator bracket, got it done and now I got my d&d headders I am fitting in the car. 2 1/8 is no joke with a factory k-member. I took the headders and cut them to bolt the tubes on one at a time. I also found some serpentine pulleys off a 460 truck I am using. Have to put some clamps on today and I will be able to give some good detailed pics of the motor tonight. I hate having a delay, but I also love the challenge to be able to build things with my bare hands.

Good Luck keep us posted.

Those of us whom are Ovaless are envious.