64 Fairlane restoration/ mods
Page 2 of 2 • 
1, 2
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane December 17th 2020, 9:30 am
31x13 old firestone slicks they shrunk about an inch
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane December 23rd 2020, 5:47 pm
Progress with the back, while I wait for rear to come in
We have room for a good size tire now...18" section width will fit in there.
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller and hbstang like this post
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane February 13th 2021, 5:08 pm
After some careful measuring I tacked on the 4 link brackets and set the rear....it looks I may have to twist the housing to point up a little. I'll do that once the motor/ and trans is set...axle centerline and crank centerline are just about level at this point
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Gregaust and Mark Miller like this post
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane February 24th 2021, 9:14 am
The bends came out good today miming and fitting now. After the cage work, I will move on to the strut towers and front end
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller likes this post
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane February 24th 2021, 9:17 am
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
jasonf and Mark Miller like this post
Re: 64 Fairlane restoration/ mods
bruno February 24th 2021, 10:05 am
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno- Moderator
- Posts : 10873
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL. -
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane February 24th 2021, 9:33 pm
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane February 27th 2021, 9:28 pm
More cage updates. The door bars were a real chore, both were different, I also had to deal with the body itself being different on both sides and not square at all. 1964 Ford tolerances were loose!
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller likes this post
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller likes this post
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller likes this post
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane March 7th 2021, 6:31 pm
The tighter the fit, the better the weld!
Take your time while notching
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller and hbstang like this post
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane April 4th 2021, 8:16 pm
Also
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
hbstang and 1982GT like this post
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller and 1982GT like this post
Mark Miller- Posts : 1895
Join date : 2009-09-01
Gregaust- Posts : 620
Join date : 2009-08-09
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller and 1982GT like this post
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane October 5th 2021, 9:29 pm
I made the tubs out of rolled steel
I hope that o devise some kind of fuel cell mount and parachute mount with the tubing in the rear
The wheel wells were stretched only 3 inches for the relatively small tires I will be using
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller and 1982GT like this post
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane January 16th 2022, 8:15 pm
Shot of the car on the ground
Rear tin dressed off and welded in.
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
1982GT likes this post
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane January 16th 2022, 8:27 pm
Motor plate shot.
Engine was set up as low and far back as possible.
K member spacers were made to gain oil pan/ steering rack clearance.
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller and 1982GT like this post
Re: 64 Fairlane restoration/ mods
Mark Miller January 16th 2022, 9:55 pm
Mark Miller- Posts : 1895
Join date : 2009-09-01
Re: 64 Fairlane restoration/ mods
Goldylox_fairlane August 9th 2022, 11:07 pm
Hopefully no more going backwards. Test fitting the trans tunnel and the re work of the front end.
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller likes this post
Goldylox_fairlane- Posts : 54
Join date : 2019-11-30
Mark Miller and hbstang like this post
Page 2 of 2 • 1, 2
Similar topics» Carb Spacer - Airflow Test
» restoration project for sell
» New Projects ???
» Crites performance/restoration status
|
|
|