Crank pulleys
2 posters
Page 1 of 1
Crank pulleys
I'm looking for a 1 slot vbelt crank pulley that will bolt to the 4 hold balancer for the alternator and also v belt pulleys and spacers that will fit on a 1" drive mandrel from Ron's.
I have an aerospace mandrel that has what I need but won't work with the crank bolt in place. ( I even made a 1/4" spacer for the balancer and recessed the mandrel some more.
Can anyone help with a solution?
I have an aerospace mandrel that has what I need but won't work with the crank bolt in place. ( I even made a 1/4" spacer for the balancer and recessed the mandrel some more.
Can anyone help with a solution?
Re: Crank pulleys
I think I figured out what I'm gonna do. I showed it to the machinist at work, and he's gonna drill the center hole out for the std. 5/8 bolt. Now I'll just have to come up with the correct length 5/8" fine thread bolt.
Re: Crank pulleys
I've cut them to length before.
Alan,measure the length. I probably have a xtra one .
Alan,measure the length. I probably have a xtra one .
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Re: Crank pulleys
Thanks Rick, the machinist should have the aerospace mandrel modified today, so I'll be able to measure the bolt length I'll need tonight.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|