BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Aftermarket ignition.

4 posters

Go down

Aftermarket ignition. Empty Aftermarket ignition.

Post  hank2531 April 17th 2013, 6:45 pm

Is the MSD ignition system worth it? I would be putting it on a '97 F- 250 with rebuilt motor, Edlebrock intake, and K&N air filter kit. Does it really make a difference, and were would I see it?

hank2531

Posts : 8
Join date : 2013-04-15
Age : 43
Location : Maine

Back to top Go down

Aftermarket ignition. Empty Re: Aftermarket ignition.

Post  mudtrucker April 17th 2013, 7:06 pm

If you have the need for start retard, timing control, or rev limiter yes but for a stock or slightly modified build I would say no.
mudtrucker
mudtrucker

Posts : 160
Join date : 2009-11-18
Location : Lancaster,Ohio

Back to top Go down

Aftermarket ignition. Empty Re: Aftermarket ignition.

Post  Frank Merkl April 17th 2013, 7:12 pm

I ran with a stock Ford module - coil and dist deep into the 8's all that was needed was to tighten up the plug gap , still use a modified stock distributer
Frank
Frank Merkl
Frank Merkl

Posts : 1524
Join date : 2008-12-17
Age : 68
Location : Brooks ,Alberta ,Canada

Back to top Go down

Aftermarket ignition. Empty Re: Aftermarket ignition.

Post  bbf-falcon April 17th 2013, 9:42 pm

Maybe NOT needed,but I have found that the hotter (MSD) spark even on a stock unit gives a better start and fuel burn. The Ford duraspark dizzy works just as well as aftermarket when setup correctly.

bbf-falcon

Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio

Back to top Go down

Aftermarket ignition. Empty Re: Aftermarket ignition.

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum