My new 528 combo

bigblok2000ranger wrote:

Barney wrote:Put a crank trigger on it moneybags;)

Thats probably what is gonna happen but I am by no means Mr. Money bags this is a budget build. 90% used parts with lots of loving!

I hear ya. Love gets ya a long way.

Think I am gonna see if I can do some horse trading to get the crank trigger and dizzy to keep this build on budget.

Whatever it takes.

buddy of mine had 2 carb setup 598 and the 1 carb woke it up.he did not have the best carbs by far just thought when i seen that intake and carb he also had time with linkage.

bigjohn2007 wrote:buddy of mine had 2 carb setup 598 and the 1 carb woke it up.he did not have the best carbs by far just thought when i seen that intake and carb he also had time with linkage.

lol, Itold him if hes never done one( dual quads ) the linkage will take a while to fig out, he fought it for a while,lol.

I thought I wasn't doing so good taking so long to get the linkage setup but Rich reassured me that sometimes it even takes him a good amount of time get them right. I finally got the linkage arms for the carbs right today then spent about 2 1/2 hours trying to get the linkage from the intake bolts up to the cross bar correct and finally decided it needed a longer bar luckily Rich had some linkages and parts from other setups and found one that was 2 inchs longer got it all baselined from there in about 30 minutes. This engine is and will be a learning experience for me.

Good luck with your build. I also have a 525ci ford motorsports A460 heads. The new TFS intake with a Dominator carb. 14.6:1 compression with a .780 lift cam. The motor is in a 2665lbs 77 Mustang II. The best 1/8 is 5.481@126.26. The best 1/4 is 8.71@153. The best 60ft is 1.22. But consistently 1.24-1.25 60ft

BigBlockFalcon wrote:Good luck with your build. I also have a 525ci ford motorsports A460 heads. The new TFS intake with a Dominator carb. 14.6:1 compression with a .780 lift cam. The motor is in a 2665lbs 77 Mustang II. The best 1/8 is 5.481@126.26. The best 1/4 is 8.71@153. The best 60ft is 1.22. But consistently 1.24-1.25 60ft

What tranny are you using? Are geared more for the 1/8 or 1/4? Is it consistant? Just curious.

I'm running a glide. It's set up for 1/4 mile. On the 8.71@153 pass the 1/8 was 5.54@123. It's deadly consistent. I won the 2011 Division 2 Bracket final's with that car.

Thank you sounds like mine should be right where I need it.

I'm definitely interested in this build. I think you will need more compression than 14.1 and the cam will have to be .800+ lift and the duration @.050 will have to be around 300. Keep us posted. I will like to know how it turns out.

Oh I will, I will not post cam specs though at the engine builders request as he considers that stuff propriety info.

Trading my 8580 dizzy and 6AL and Blaster II coil to a friend for new Crank Trigger and Crank Trigger Distributor.

Think we have my headbolts from the 523 traded for a set of head studs for my A460's. Block and rotating assembly will probably be headed to machine shop sometime this coming week.

good looking stuff , but damn clean your finger nails before you ruin a pic

bruno wrote:good looking stuff , but damn clean your finger nails before you ruin a pic

You mister manicure now !!!

lol

bruno wrote:good looking stuff , but damn clean your finger nails before you ruin a pic

LMAO! I thought they were pretty clean as is, lol

I am constantly tinkering with things and don't think I have ever been able to keep them "clean" for more than an hour or two. Honestly if I ever get the point where I don't have a project to tinker with I create one.

Bruno here is some stuff I do when I am bored, lol

Been doing some research today and it looks like a real possibility to happen, I am gonna attempt to set the world record for quickest N/A all steel Ford Ranger with this build.

69F100 wrote:

From what I can find the quickest all steel Ford Ranger is in Houston, TX and runs 8.62@162 but it has a turbocharged smallblock chevy (cough cough)

We have a member here with a red ,white,and blue ranger up in new jersey I think his name is Rick but can't can't remember rihgt off hand I beleave is that fast or faster but not sure if his is steel or all steel may be he will see this and post

I am pretty sure his is glass body, but maybe not.

bigblok2000ranger wrote:

69F100 wrote:

From what I can find the quickest all steel Ford Ranger is in Houston, TX and runs 8.62@162 but it has a turbocharged smallblock chevy (cough cough)

Fastest steel Ranger, that's live saying you have the stickiest diarrhea turd in the world...

Hey thats selling point to sponsors!