Thinking of making the BBF change
3 posters
Page 1 of 1
Thinking of making the BBF change
T. Neal September 17th 2011, 3:26 pm
I have a 10in tire foxbody That I have been racing for a few years with a victor sr headed sbf. Think of changing to a BBF ford so came here to learn a little about them and what I will need to get the car to run 4.90's at 3250lbs. Car has been 5.30's with a 400jet at 3000lbs so far. Car works great now and has consistent 1.21 60 ft
T. Neal- Posts : 8
Join date : 2011-09-17
Re: Thinking of making the BBF change
bruno September 17th 2011, 3:53 pm
welcome to the site Mr. Neal, im making the switch over to the TFS a460 head with anywere from 580 - 612 cubes myself and im hoping for some 80-90's with my deal , Give Lem Evans a shout when you get a chance and can go over your future build with him and he can guide you in the right direction ....
good luck and welcome to the site
good luck and welcome to the site
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno- Moderator
- Posts : 10874
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL. -
Re: Thinking of making the BBF change
bbf-falcon September 18th 2011, 6:23 am
Welcome too the forum Mr. Neal 
bbf-falcon- Posts : 8995
Join date : 2008-12-03
Location : Jackson, Ohio
Similar topics» Timing Pointer for Stock Timing Cover
» Making some progress
» making some progress!!
» Making your own gaskets
» Won't be making it to the bash
» Making some progress
» making some progress!!
» Making your own gaskets
» Won't be making it to the bash
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|