533 single turbo bbf dyno
+5
'65 T-BOLT
bruno
dfree383
whatbumper
cubicgator
9 posters
Page 1 of 1
533 single turbo bbf dyno
cubicgator April 28th 2011, 10:53 pm
Thought i would share our dyno video from last november before we went to vegas for scsn xdr.
http://www.streetfire.net/video/stang-1495hp_2207963.htm
http://www.streetfire.net/video/stang-1495hp_2207963.htm
cubicgator- Posts : 45
Join date : 2009-08-12
Age : 53
Location : gales creek oregon
eagle275 likes this post
Re: 533 single turbo bbf dyno
whatbumper April 29th 2011, 8:46 am
I know I haven't read every post on here but what are the specs of that monster. That was pretty badass!
whatbumper- Posts : 3024
Join date : 2009-11-11
Age : 43
eagle275 likes this post
dfree383- BBF CONTRIBUTOR
- Posts : 14802
Join date : 2009-07-09
Location : Home Wif Da Wife.....
Re: 533 single turbo bbf dyno
bruno April 29th 2011, 9:22 am
nice production ....... have you sold the car yet ?
_________________
coming soon x275 build .........
thanks to all my sponsors :
www.OakleyMotorsports.com
www.Induction-Solutions.com
www.bfevansraceparts.com
www.ultimateconverter.com
www.keithfulpmotorsports.com
bruno- Moderator
- Posts : 10874
Join date : 2008-12-02
Age : 51
Location : MILLBROOK , AL. -
Re: 533 single turbo bbf dyno
'65 T-BOLT April 29th 2011, 9:42 am
Nice numbers! Hp..1495...and tq..1200....
'65 T-BOLT- Posts : 1464
Join date : 2009-08-28
Age : 53
Location : Hagerstown,Maryland
Re: 533 single turbo bbf dyno
cubicgator April 29th 2011, 10:38 am
Thanks guys , i have decided to keep car we are trying to get 125 lbs off to run at 3350, and going to twin b/w s488 and belt drive fuel pump we were getting alot of back pressure with single .
The engine is really basic A-460 block, A heads lite exhaust porting, crower stud mounts with girdles, 720 lift don bailey cam, 8.5 diamand pistons, grp rods, eagle forged crank 106 garret turbo 160 lb injectors, we had maxed out weldon pump on dyno max hp was at 21 psi , 23 we lost power ,back pressure. with a glide 3.20 gears at 3475 on radails have been 7.60 at 186 with a 1.25 60 ft
Thanks to Lem Evans parts, all ford performance fab and tuning, Sick and twisted fab, Scotty at RHP , This is a very low buck home built car and i could not be as fast as i am without the advise and help of many shops and forum members.
Shooting for a 7.4 at 190 this year
thanks wally
The engine is really basic A-460 block, A heads lite exhaust porting, crower stud mounts with girdles, 720 lift don bailey cam, 8.5 diamand pistons, grp rods, eagle forged crank 106 garret turbo 160 lb injectors, we had maxed out weldon pump on dyno max hp was at 21 psi , 23 we lost power ,back pressure. with a glide 3.20 gears at 3475 on radails have been 7.60 at 186 with a 1.25 60 ft
Thanks to Lem Evans parts, all ford performance fab and tuning, Sick and twisted fab, Scotty at RHP , This is a very low buck home built car and i could not be as fast as i am without the advise and help of many shops and forum members.
Shooting for a 7.4 at 190 this year
thanks wally
cubicgator- Posts : 45
Join date : 2009-08-12
Age : 53
Location : gales creek oregon
eagle275 likes this post
Lem Evans- Posts : 7445
Join date : 2008-12-03
Location : Livermore , Ky -
Re: 533 single turbo bbf dyno
cubicgator April 29th 2011, 10:59 am
My dream is to build a tube chassis 64 fairlane for combo some day
cubicgator- Posts : 45
Join date : 2009-08-12
Age : 53
Location : gales creek oregon
Re: 533 single turbo bbf dyno
'65 T-BOLT April 29th 2011, 4:40 pm
my dream build too but in my 65 fairlane!cubicgator wrote:My dream is to build a tube chassis 64 fairlane for combo some day
'65 T-BOLT- Posts : 1464
Join date : 2009-08-28
Age : 53
Location : Hagerstown,Maryland
468SN95- Posts : 4
Join date : 2011-04-25
Age : 52
Location : North Central Ohio
Re: 533 single turbo bbf dyno
comecorrect September 29th 2011, 5:28 am
What was the 1/8 mile time? Thanks!
MIKE
MIKE
comecorrect- Posts : 2
Join date : 2010-07-05
Re: 533 single turbo bbf dyno
cubicgator October 30th 2011, 11:06 am
Sorry haven't been on in a while, best with single turbo was 5.008 at 148 with a 1.25 60 ft radails at 3475
Just got car runnin with twin b/w s488 and belt drive fuel pump hope to dyno next week and go to SCSN at vegas
Just got car runnin with twin b/w s488 and belt drive fuel pump hope to dyno next week and go to SCSN at vegas
cubicgator- Posts : 45
Join date : 2009-08-12
Age : 53
Location : gales creek oregon
Re: 533 single turbo bbf dyno
cubicgator October 30th 2011, 11:07 am
Sorry haven't been on in a while, best with single turbo was 5.008 at 148 with a 1.25 60 ft radails at 3475
Just got car runnin with twin b/w s488 and belt drive fuel pump hope to dyno next week and go to SCSN at vegas
Just got car runnin with twin b/w s488 and belt drive fuel pump hope to dyno next week and go to SCSN at vegas
cubicgator- Posts : 45
Join date : 2009-08-12
Age : 53
Location : gales creek oregon
Re: 533 single turbo bbf dyno
jc10000rpm December 8th 2011, 9:45 am
what size turbo did u use on your single setup, is it available ?
jc10000rpm- Posts : 193
Join date : 2008-12-03
eagle275 likes this post
Similar topics» EFI for 557 single turbo?
» single turbo +carb+big cubes=??
» Single turbo size for 460 street and strip
» 460 Single Turbo In 1973 Torino with A460 Heads
» My experience on a chassis dyno with my Turbo 2.3 T-Bird
» single turbo +carb+big cubes=??
» Single turbo size for 460 street and strip
» 460 Single Turbo In 1973 Torino with A460 Heads
» My experience on a chassis dyno with my Turbo 2.3 T-Bird
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|