BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

390 stroker kit

5 posters

Go down

390 stroker kit Empty 390 stroker kit

Post  MickRich May 22nd 2020, 2:54 am

Hi there have you any recommendations on someone that will ship stroker kit over to the UK, have contacted survival but no response and only had an automated reply from cnc, dont know how the covid deal is affecting you guys over there, it was pretty bad getting some stuff over here so presume not much different there but any ideas be much appreciated, cheers mick

MickRich

Posts : 6
Join date : 2009-08-08

Back to top Go down

390 stroker kit Empty Re: 390 stroker kit

Post  bosshoss May 22nd 2020, 4:34 am

you can order Scat assembly's either direct or through summit or jegs.

dkp
bosshoss
bosshoss
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 499
Join date : 2009-08-10

Back to top Go down

390 stroker kit Empty Re: 390 stroker kit

Post  jasonf May 22nd 2020, 3:12 pm

It is going to depend on what state they are in and just how Democrat Nazi they are.... most places like that in La and Tx stayed open during this nonsense. Hopefully someone else in the group that does that will chime in.
jasonf
jasonf
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 2992
Join date : 2009-07-14
Age : 54
Location : Lafayette, LA

Back to top Go down

390 stroker kit Empty Re: 390 stroker kit

Post  rmcomprandy May 22nd 2020, 7:51 pm

MickRich wrote:Hi there have you any recommendations on someone that will ship stroker kit over to the UK, have contacted survival but no response and only had an automated reply from cnc, dont know how the covid deal is affecting you guys over there, it was pretty bad getting some stuff over here so presume not much different there but any ideas be much appreciated, cheers mick

I haven't gotten a 4.250" stroke kit since February but, SCAT has kits which offer some customization, if you call them. They may direct you to one of their dealers.
All the ones I have gotten use MAHLE piston and ring kits with 6.700" rods, (I-beam or H-beam), and cast steel or forged steel crankshafts.

rmcomprandy

Posts : 6095
Join date : 2008-12-02
Location : Roseville, Michigan

http://www.rmcompetition.com

Back to top Go down

390 stroker kit Empty Re: 390 stroker kit

Post  MickRich May 24th 2020, 12:54 pm

I have emailed scat but waiting to see if get a response from them, looked at jegs etc but they say stuff is shipped straight from manufacturer so will see if scat responds, another note concerning these kits is why no +.040" bore options as I could see,apart from cnc and survival that give this option, I will need 040" as block at 030" already and will need a bore

MickRich

Posts : 6
Join date : 2009-08-08

Back to top Go down

390 stroker kit Empty Re: 390 stroker kit

Post  gt350hr September 9th 2020, 12:10 pm

As long as there are rings available ( they are!) there is no reason why Scat ( or anyone) can't get a piston made in .040 over.

gt350hr

Posts : 662
Join date : 2014-08-20
Location : Anaheim , CA

Back to top Go down

390 stroker kit Empty Re: 390 stroker kit

Post  rmcomprandy September 18th 2020, 9:53 pm

gt350hr wrote:    As long as there are rings available ( they are!) there is no reason why Scat ( or anyone) can't get a piston made in  .040 over.

Tom Lieb or his people at SCAT will deal with you and get you whatever bore size of stroker kit you want.
CALL them ...(310) 370-5501

rmcomprandy

Posts : 6095
Join date : 2008-12-02
Location : Roseville, Michigan

http://www.rmcompetition.com

Back to top Go down

390 stroker kit Empty Re: 390 stroker kit

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum