BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Rod bolts with h beams

Go down

Rod bolts with h beams  Empty Rod bolts with h beams

Post  Steve-oh on March 24th 2020, 3:09 pm

Looking at h beam rods for my new engine, 557 8-850 hp factory block, looking at the scats, will the 8740 bolts be ok or do I need the 2000 bolts


Last edited by Steve-oh on March 24th 2020, 3:37 pm; edited 1 time in total (Reason for editing : Spelling)

Steve-oh

Posts : 53
Join date : 2018-09-18

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  rmcomprandy on March 24th 2020, 5:38 pm

Steve-oh wrote:Looking at h beam rods for my new engine, 557 8-850 hp factory block, looking at the scats, will the 8740 bolts be ok or do I need the 2000 bolts

8740 are usually fine unless the engine will see high RPM often or abuse.

rmcomprandy

Posts : 5626
Join date : 2008-12-02
Location : Roseville, Michigan

http://www.rmcompetition.com

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  Steve-oh on March 24th 2020, 6:51 pm

7k ok?

Steve-oh

Posts : 53
Join date : 2018-09-18

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  rmcomprandy on March 24th 2020, 7:21 pm

Steve-oh wrote:7k ok?

7K with a 4 1/2 inch stroke is not an everyday stroker engine. You better decide on more than rod bolts.

rmcomprandy

Posts : 5626
Join date : 2008-12-02
Location : Roseville, Michigan

http://www.rmcompetition.com

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  6t6mustang on April 21st 2020, 9:52 pm

Arp 2000, consider a callies compstar, same price range but the big end is stronger and come with arp 2000s..
6t6mustang
6t6mustang

Posts : 89
Join date : 2013-09-08
Age : 45
Location : redding, ca

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  gt350hr on April 22nd 2020, 11:30 am

Both are offshore origin. 8740 bolts have less "cycle life" and should be replaced any time the engine is torn down. ARP 2000 bolts can take several re torques. Checking with a stretch gauge will show you when the bolt is stretching too much while trying to get the proper torque and tell you it is failing.

gt350hr

Posts : 597
Join date : 2014-08-20
Location : Anaheim , CA

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  Steve-oh on April 22nd 2020, 11:37 am

Got the eagle h beams with the l19 bolts

Steve-oh

Posts : 53
Join date : 2018-09-18

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  Curt on April 22nd 2020, 7:45 pm

Steve-oh wrote:Got the eagle h beams with the l19 bolts
Don't forget to wear your gloves when handling them.
Curt
Curt

Posts : 2731
Join date : 2009-02-08
Age : 58
Location : Henrietta, Texas but mostly on the road

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  Steve-oh on April 22nd 2020, 8:58 pm

Lol, over the 19 for sure!

Steve-oh

Posts : 53
Join date : 2018-09-18

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  Mark O'Neal on April 23rd 2020, 3:17 am

Look at using a Molnar rod.

Mark O'Neal

Posts : 241
Join date : 2009-08-12

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  Lem Evans on April 23rd 2020, 8:43 am

Mark O'Neal wrote:Look at using a Molnar rod.

Yep, Molnar has a proper on center Ford rod.

They are std. with 2000 arp bolts.

Lem Evans

Posts : 7350
Join date : 2008-12-03
Location : Livermore , Ky

http://bfevansraceparts.com

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  gt350hr on April 23rd 2020, 10:45 am

+1 on Molnar. They are a little higher priced , but the center to center , big and small end sizing , and weights are spot on . Mine are ten years old and still doing the job. They are often lighter and certainly an improved design over other H beams out there.

gt350hr

Posts : 597
Join date : 2014-08-20
Location : Anaheim , CA

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  Uglytruck on April 23rd 2020, 11:16 am

I have been running Molnar rods for several seasons with a 4.5" crank, spinning it 7200 regularly. Holding up great. and yes, they have the arp2000 bolts. When I was having tachometer issues I accidentally ran it up to much more than 7200.

Uglytruck

Posts : 26
Join date : 2009-01-05
Age : 62
Location : Sandy Oregon

Back to top Go down

Rod bolts with h beams  Empty Re: Rod bolts with h beams

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum