Cylinder Head to Block Dowel Pins
Cylinder Head to Block Dowel Pins
t-bird racer on February 9th 2020, 11:25 am
While taking off my cylinder heads to replace the Valve Springs I noticed that it seems that during the last refreshing of my engine one of the cylinder head to engine block alignment dowel pins was left out. The head was located with one dowel , and just the head bolts on the other side.
Is there anywhere to find new ones? Or do I just have to visit some machine shops.
Is there anywhere to find new ones? Or do I just have to visit some machine shops.
t-bird racer- Posts : 169
Join date : 2010-01-10
Re: Cylinder Head to Block Dowel Pins
wickettoby1 on February 9th 2020, 11:36 am
Summit Racing sells them but not in small quantities, if I recall most of the options have at least 10 in the package but they only cost a few dollars. I'd check any local machine shops first and use the internet as a second option.
wickettoby1- Posts : 258
Join date : 2016-02-02
Location : SE Michigan
Re: Cylinder Head to Block Dowel Pins
Lem Evans on February 9th 2020, 1:45 pm
We [BF EVANS Ford] have them.
Lem Evans- Posts : 7350
Join date : 2008-12-03
Location : Livermore , Ky -
Re: Cylinder Head to Block Dowel Pins
BBFTorino on February 9th 2020, 11:53 pm
NAPA usually carries them.
BBFTorino- Posts : 850
Join date : 2015-12-31
t-bird racer- Posts : 169
Join date : 2010-01-10
Re: Cylinder Head to Block Dowel Pins
gt350hr on February 11th 2020, 1:39 pm
Same as an FE (352-428)
gt350hr- Posts : 597
Join date : 2014-08-20
Location : Anaheim , CA
Re: Cylinder Head to Block Dowel Pins
t-bird racer on February 20th 2020, 2:07 pm
I dropped off my heads for a valve job and new springs at the shop. They have them in stock. Thanks
t-bird racer- Posts : 169
Join date : 2010-01-10
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|