BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Kaase SR-71 headed 1,100 + HP BBF

+3
Goldylox_fairlane
BBFTorino
83-88T-Bird Guy
7 posters

Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Kaase SR-71 headed 1,100 + HP BBF

Post  83-88T-Bird Guy January 23rd 2020, 9:14 am

https://www.youtube.com/watch?time_continue=1212&v=dIrvPfrnXjM&feature=emb_title
83-88T-Bird Guy
83-88T-Bird Guy

Posts : 1003
Join date : 2008-12-03
Age : 109
Location : Bardstown, KY

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  BBFTorino January 23rd 2020, 6:11 pm

I'd like to know what the compression ratio and the cam specs are on that motor!

BBFTorino

Posts : 982
Join date : 2015-12-31

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  Goldylox_fairlane January 23rd 2020, 9:06 pm

Great video! It has to be on race fuel or E85. I would never think the garbage pump gas we have locally could support that power....also really cool this motor makes all that power below 8000
I bet you could run a hydraulic roller and make similar power with morel lifters.

Goldylox_fairlane

Posts : 54
Join date : 2019-11-30

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  68galaxie January 23rd 2020, 9:34 pm

BBFTorino wrote:I'd like to know what the compression ratio and the cam specs are on that motor!

Peak torque @ 6000 rpm and 598" = big cam.
68galaxie
68galaxie

Posts : 349
Join date : 2010-04-13
Location : Edmonton AB

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  Mark Miller January 24th 2020, 12:27 am

83-88T-Bird Guy wrote:https://www.youtube.com/watch?time_continue=1212&v=dIrvPfrnXjM&feature=emb_title

That Chevy guy cracked me up saying the BBF at 34 cubic inches less barely edged out the BBC damn I thought 86 Horsepower was quite a bit? Smile

Mark Miller

Posts : 1861
Join date : 2009-09-01

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  c.evans January 24th 2020, 1:44 am

We built a 611 CID engine with ported SR-71 heads for Presley Rae Baker to run in her NHRA Super Gas Mustang roadster. We dynoed it last spring down at Jon Kaase's and it made 1137 Hp on Q-16 with an out of the box Air Boss manifold and a single 1450 carb. I remember Cliff Moore saying that it was 1.86 Hp per CID, and that they had done one that made 1.85 Hp per CID but were pulling more crankcase vacuum than I was, so therefore we were all pleased. There's videos of that dyno session and lots of pictures of Presley changing and testing four different intake manifolds all over Facebook on the various BB Ford sites. Then we detuned it and used a smaller 1050 cfm carb on C-16 which is the way she races it. Anyway, it runs really good in her car and at the U S Nationals there were 135 Super Gas cars entered and racing, but only a dozen were able to run the 9.90 index with a top end charge of over 160 mph. Her's ran consistent 162 mph all day long.
Charlie

c.evans
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 2260
Join date : 2008-12-03

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  snuff98 January 24th 2020, 9:49 am

What do you think the port work, over out of the box heads was worth? And was it worth the extra effort?

snuff98

Posts : 245
Join date : 2016-08-04
Age : 53
Location : Hessmer Louisiana

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  Goldylox_fairlane January 24th 2020, 6:42 pm

Wow delay boxes??

Goldylox_fairlane

Posts : 54
Join date : 2019-11-30

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  c.evans January 26th 2020, 12:51 am

The NHRA Super Street, Super Gas and Super Comp classes all use throttle stops. Their indexes are 10.90, 9.90, and 8.90 et.

As for the porting, I don't know for sure because nobody has ever done a back to back dyno test session with unported and then ported SR-71 heads. However, I will say the unported heads are very nice out of the box. They do have a CNC machined chamber from Kaase. Maybe the porting was worth 40 Hp.
Charlie

c.evans
BBF VENDOR SPONSOR
BBF VENDOR SPONSOR

Posts : 2260
Join date : 2008-12-03

Back to top Go down

Kaase  SR-71 headed 1,100 + HP BBF  Empty Re: Kaase SR-71 headed 1,100 + HP BBF

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum