Deep trans pan

Looking to replace the pan on my C-6, anyone using the PML pan?

Which PN? I have sold/used a few of the deep pans, similar shape to 4wd app. Fit and finish is nice on any application that I've used from them, sold a couple dozen in the past 2 years.

Not sure which PN, I'll have to look at them again. They looked like nice castings, have thick mating flanges and I think hold an additional 1/2 qt than the others I've been looking at. I've been using the OEM 4 wd pan. Which one are you using?

Thanks, Sheldon G

Same. 4wd deep sump pan. I tend to make a pickup for them, though PML says not to bother.

I prefer the TCI pan as it is girdled properly and comes with a great filter extension and the proper mesh filter pt 428000
Frank

PS all my trans builds I sell come with this pan , over 1000!
Frank

Thanks both of you for responding. I don't think I've looked at the TCI pan yet; I'll check them out.
Sheldon

This is the pan Frank was referring to. The plastic bag has filter and filter extension. It is stout, will give the case some more beef. Might even be able to drill & tap the casting for temp gauge fitting without welding bung in. $160

" />

This is the one I used.

https://www.holley.com/products/drivetrain/transmission_pans_and_accessories/transmission_pans/ford/parts/40281

When you need to replace the filter, don't buy the one from B&M. I found out from my local transmission guy that it is just a chrysler filter. Ordered 2 from amazon for a third of the b&m price

I used the "no name" one from Summit. Cheaper than the TCI.

Thanks for the pictures, I think trans has an issue so I will replace the OEM pan soon.

Sheldon G.