BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Getting the parking brake cable out of the backing plate......

4 posters

Go down

Getting the parking brake cable out of the backing plate...... Empty Getting the parking brake cable out of the backing plate......

Post  JBR-3 May 28th 2018, 1:54 pm

.


Last edited by JBR-3 on September 20th 2020, 1:54 pm; edited 1 time in total (Reason for editing : .)

JBR-3

Posts : 266
Join date : 2009-08-17

Back to top Go down

Getting the parking brake cable out of the backing plate...... Empty Re: Getting the parking brake cable out of the backing plate......

Post  aquartlow May 28th 2018, 2:34 pm

I find it easier to remove the cable by using a hose clamp to close the "fingers" of the parking brake cable's ferrule that locks it into the backing plate. Once the closed "fingers" just make it through the plate, I remove the clamp and the cable assembly is then easily removed. Hope this helps.
aquartlow
aquartlow

Posts : 167
Join date : 2010-02-05
Age : 55
Location : Summerfield, Fl

Back to top Go down

Getting the parking brake cable out of the backing plate...... Empty Re: Getting the parking brake cable out of the backing plate......

Post  jasonf May 28th 2018, 4:21 pm

If you don't have a clamp small enough you can just use pliers to compress a few of them, turn the cable at an angle to get those fingers started then turn a little and do it again till all the fingers are through.
jasonf
jasonf
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 2992
Join date : 2009-07-14
Age : 54
Location : Lafayette, LA

Back to top Go down

Getting the parking brake cable out of the backing plate...... Empty Re: Getting the parking brake cable out of the backing plate......

Post  Frank Merkl May 29th 2018, 9:07 am

put a 1/2" box end wrench on it and rotate back and forth it will pop right out
Frank
Frank Merkl
Frank Merkl

Posts : 1524
Join date : 2008-12-17
Age : 68
Location : Brooks ,Alberta ,Canada

Back to top Go down

Getting the parking brake cable out of the backing plate...... Empty Re: Getting the parking brake cable out of the backing plate......

Post  JBR-3 May 29th 2018, 6:14 pm

.


Last edited by JBR-3 on September 20th 2020, 1:55 pm; edited 1 time in total (Reason for editing : .)

JBR-3

Posts : 266
Join date : 2009-08-17

Back to top Go down

Getting the parking brake cable out of the backing plate...... Empty Re: Getting the parking brake cable out of the backing plate......

Post  jasonf May 30th 2018, 7:18 am

Frank Merkl wrote:put a 1/2" box end wrench on it and rotate back and forth it will pop right out
Frank

I have read that before and forgot all about it.
jasonf
jasonf
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 2992
Join date : 2009-07-14
Age : 54
Location : Lafayette, LA

Back to top Go down

Getting the parking brake cable out of the backing plate...... Empty Re: Getting the parking brake cable out of the backing plate......

Post  Frank Merkl May 30th 2018, 9:27 am

20 years on the bench ! you learn a few tricks !
Frank
Frank Merkl
Frank Merkl

Posts : 1524
Join date : 2008-12-17
Age : 68
Location : Brooks ,Alberta ,Canada

Back to top Go down

Getting the parking brake cable out of the backing plate...... Empty Re: Getting the parking brake cable out of the backing plate......

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum