BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Dual bolt pattern flexplate?

5 posters

Go down

Dual bolt pattern flexplate? Empty Dual bolt pattern flexplate?

Post  David Cole January 18th 2018, 10:44 pm

I need a flexplate, 164 tooth, 28 oz for a sbf with dual bolt patterns. 11 7/16" and 10 1/2" for the converter. Needs to be a C-4/FMX. C-6 will not work due to depth offset.

I'm putting a late model 4R70W computer controlled transmission in my 69 Mach 1 with a 351C. Car currently has an FMX flexplate that will work but it only has the large bolt circle. I want the option of a smaller converter. Was going to do an AOD swap but the 4R is a much better and stronger transmission.
David Cole
David Cole
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 851
Join date : 2009-08-06
Location : Jasper, Al

http://my.att.net/p/s/community.dll?ep=16&groupid=66449&

Back to top Go down

Dual bolt pattern flexplate? Empty Re: Dual bolt pattern flexplate?

Post  whitefield January 19th 2018, 12:45 am

I never used one of these , but I think it maybe what you are looking for .


https://www.summitracing.com/parts/pma-pax30211/applications
whitefield
whitefield

Posts : 2243
Join date : 2009-08-23
Age : 55

Back to top Go down

Dual bolt pattern flexplate? Empty Re: Dual bolt pattern flexplate?

Post  David Cole January 20th 2018, 12:48 pm

whitefield wrote:I never used one of these , but I think it maybe what you are looking for .


https://www.summitracing.com/parts/pma-pax30211/applications

Thanks,

I checked the mfg website. It's got a dual pattern, but it says it won't work with the larger factory type converter (with lockup clutch). Their website says to use a different part # for the converter, but the one they advise only has a single bolt pattern.
David Cole
David Cole
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 851
Join date : 2009-08-06
Location : Jasper, Al

http://my.att.net/p/s/community.dll?ep=16&groupid=66449&

Back to top Go down

Dual bolt pattern flexplate? Empty Re: Dual bolt pattern flexplate?

Post  Bill Heard January 20th 2018, 2:35 pm

Maybe Keith Fulp could drill some holes for you?
Bill Heard
Bill Heard

Posts : 115
Join date : 2011-04-10
Age : 79
Location : Portland Oregon

Back to top Go down

Dual bolt pattern flexplate? Empty Re: Dual bolt pattern flexplate?

Post  pmrphil January 20th 2018, 2:42 pm

David - take a look at PRW #1830211 - should be the one you want.
Phil

pmrphil

Posts : 170
Join date : 2016-10-29

Back to top Go down

Dual bolt pattern flexplate? Empty Re: Dual bolt pattern flexplate?

Post  dfree383 February 13th 2018, 10:19 am

I think TCI has a part available
dfree383
dfree383
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 14772
Join date : 2009-07-09
Location : Home Wif Da Wife.....

Back to top Go down

Dual bolt pattern flexplate? Empty Re: Dual bolt pattern flexplate?

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum