Hooking up a duraspark2

Go down

Hooking up a duraspark2 Empty Hooking up a duraspark2

Post  65Tremecgt on August 5th 2016, 10:26 am

Hey all, in the process of swapping most of a 79 460 C6 truck into my 66 f250. My question is about the factory duraspark2. I'm more families with just running an older style distributor and putting in a pertronix. However I have everything from the 79 and was thinking of trying to run the duraspark2 since j have it. What do I need to hook it up and any other suggestions? Mostly stock setup will be for general truck duty, car hauler and small camper towing. Thanks!


Posts : 1
Join date : 2016-08-03

Back to top Go down

Hooking up a duraspark2 Empty Re: Hooking up a duraspark2

Post  jeffgfg on August 5th 2016, 5:37 pm

If you look under the sticky at the top of this page marked "Ford ignition" It has a complete diagram of the system and you should be able to wire it from there.


Posts : 338
Join date : 2010-02-06

Back to top Go down

Back to top

Permissions in this forum:
You cannot reply to topics in this forum