BIG BLOCK FORD
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Fox swap

4 posters

Go down

Fox swap Empty Fox swap

Post  BIGBLOCKBOE May 12th 2014, 10:25 am

Building 85 fox with 532 A429 heads ported with a little nitrous . Was planning A headed combo but shortblock was already built so I will save it for the next combo. Have ran SBFwith C4 for years. And now time for a change.kasse solid roller specd out for A460 heads wondering how much it will hurt me on the smaller heads.Pictures to come when I get smart enough to figure out how!

BIGBLOCKBOE

Posts : 21
Join date : 2014-02-12

Back to top Go down

Fox swap Empty Re: Fox swap

Post  bigjohn2007 May 14th 2014, 6:09 pm

I would not uses it just because it bigger does not mean it better.You will have to use photobucket to post pictures just load your pictures to bucket then copy/paste to this site.


Last edited by bigjohn2007 on May 15th 2014, 4:22 pm; edited 1 time in total
bigjohn2007
bigjohn2007
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 790
Join date : 2009-08-19
Age : 45
Location : Cerro Gordo n.c

Back to top Go down

Fox swap Empty Re: Fox swap

Post  dfree383 May 14th 2014, 6:35 pm

What's the cam specs?
dfree383
dfree383
BBF CONTRIBUTOR
BBF CONTRIBUTOR

Posts : 14774
Join date : 2009-07-09
Location : Home Wif Da Wife.....

Back to top Go down

Fox swap Empty Fox Swap

Post  1970 ford maverick May 15th 2014, 11:43 pm

Could you tell us more about your Build,Cam specs,comp ratio,what did your A heads flow,are they stock ,are ported?Thnx,MavMan
1970 ford maverick
1970 ford maverick

Posts : 180
Join date : 2011-09-30
Location : JACKSONVILLE,FLORIDA

Back to top Go down

Fox swap Empty 532 cobra jet heads

Post  BIGBLOCKBOE May 16th 2014, 12:11 am

Mav man the trick flow 340 cc heads 2.3 intake with cnc chambers , was going to run them like that but will be ported now. Cam 780 lift I think it is 286 duration on 112 . Nice Mav. Comp should be around 12 or 13 to 1 JE flat tops bore 4.440 victor in f2f ake and heads are ported

BIGBLOCKBOE

Posts : 21
Join date : 2014-02-12

Back to top Go down

Fox swap Empty Fox Swap

Post  1970 ford maverick May 21st 2014, 8:23 pm

BIGBLOCKBOE wrote:Mav man the trick flow 340 cc heads 2.3 intake with cnc chambers , was going to run them like that but will be ported now. Cam 780 lift I think it is 286 duration on 112 . Nice Mav. Comp should be around 12 or 13 to 1 JE flat tops  bore 4.440 victor in f2f ake and heads are ported
Boe,im no pro,but I would run that cam . I think you will be very pleased with the performance,keep us posted!
1970 ford maverick
1970 ford maverick

Posts : 180
Join date : 2011-09-30
Location : JACKSONVILLE,FLORIDA

Back to top Go down

Fox swap Empty Re: Fox swap

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum